52pi52Pi· Capteurs
52Pi IoT Node(A) One of Docker Pi Series Module Contain GSM GPS Lora Onboard 5V+3V Dual Power Supply Radio Device for Raspberry Pi
Réf. fabricant EP-0105
20.39 $
Réf. fabricant EP-0105
Vendu par 52pi à 17.67 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 39.20 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 17.67 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 6.53 € |
| Total livré | 39.20 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Tension | 5 V |
| Poids | 100 g |
[Description] IOT Node(A) is one of Docker Pi series module. IOT Node(A) = GPS/BDS + GSM + Lora. I2C directly controls Lora, sends and receives data, controls the GSM/GPS/BDS module through SC16IS752, the mainboard only needs I2C support. Support Raspberry Pi and other similar products. [Specification] GPRS section 1. Low power consumption, standby sleep current <1mA 2. Support GSM/GPRS four frequency bands, including 850, 900, 1800, 1900MHZ; 3. GPRS Class 10; 4. Support GPRS data service, maximum data rate, download 85.6Kbps, upload 42.8Kbps; 5. Support standard GSM07.07, 07.05 AT commands, and access the serial port through I2C interface conversion. 6. AT commands support standard AT and TCP/IP command ports GPS section 1. Support BDS/GPS joint positioning 2. Support A-GPS, A-BDS 3. Support standard SIM card LORA section 1. City working conditions: transmission distance of 500 meters (RF parameters: 0x50) In all cases： the minimum guaranteed 300 meters transmission. 2. Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation methods 3. Ultra-high receiver sensitivity as low as -141 dBm 4. Support preamble detection 5. Packet engine with CRC, up to 256 bytes 6. LORA transceiver indicator [Features] DockerPi Series Programmable Control directly (without programming) Extend the GPIO Pins GPS/BDS Support GSM Support Lora Support Can Stack with other Stack board Independent of the mainboard hardware (require I2C support) [Package Includes] 1 x IoT Node(A) Board 1 x Instructions 4 x M2.5*12 + 6 Copper stick 4 x M2.5*6 Nut 4 x M2.5*6 Half-round head screw 1 x 433MHz L-Shaped Tape Antenna 1 x 2.4GHz PCB Antenna 1 x GPS/BDS High Gain GPS Built-in Ceramic Active Antenna [52Pi WiKi] EP-0105 - 52Pi Wiki
