52pi52Pi· Sensors
52Pi IoT Node(A) One of Docker Pi Series Module Contain GSM GPS Lora Onboard 5V+3V Dual Power Supply Radio Device for Raspberry Pi
Manufacturer part no. EP-0105
$20.39≈ 17.67 €
Price summary
Listed by 52pi at €17.67. Delivered to France, including shipping, VAT and any customs duty, it comes to about €39.20. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €17.67 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.53 |
| Total delivered | €39.20 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Electrical
| Voltage | 5 V |
Mechanical
| Weight | 100 g |
Description
[Description] IOT Node(A) is one of Docker Pi series module. IOT Node(A) = GPS/BDS + GSM + Lora. I2C directly controls Lora, sends and receives data, controls the GSM/GPS/BDS module through SC16IS752, the mainboard only needs I2C support. Support Raspberry Pi and other similar products. [Specification] GPRS section 1. Low power consumption, standby sleep current <1mA 2. Support GSM/GPRS four frequency bands, including 850, 900, 1800, 1900MHZ; 3. GPRS Class 10; 4. Support GPRS data service, maximum data rate, download 85.6Kbps, upload 42.8Kbps; 5. Support standard GSM07.07, 07.05 AT commands, and access the serial port through I2C interface conversion. 6. AT commands support standard AT and TCP/IP command ports GPS section 1. Support BDS/GPS joint positioning 2. Support A-GPS, A-BDS 3. Support standard SIM card LORA section 1. City working conditions: transmission distance of 500 meters (RF parameters: 0x50) In all cases： the minimum guaranteed 300 meters transmission. 2. Support FSK, GFSK, MSK, GMSK, LoRaTM and OOK modulation methods 3. Ultra-high receiver sensitivity as low as -141 dBm 4. Support preamble detection 5. Packet engine with CRC, up to 256 bytes 6. LORA transceiver indicator [Features] DockerPi Series Programmable Control directly (without programming) Extend the GPIO Pins GPS/BDS Support GSM Support Lora Support Can Stack with other Stack board Independent of the mainboard hardware (require I2C support) [Package Includes] 1 x IoT Node(A) Board 1 x Instructions 4 x M2.5*12 + 6 Copper stick 4 x M2.5*6 Nut 4 x M2.5*6 Half-round head screw 1 x 433MHz L-Shaped Tape Antenna 1 x 2.4GHz PCB Antenna 1 x GPS/BDS High Gain GPS Built-in Ceramic Active Antenna [52Pi WiKi] EP-0105 - 52Pi Wiki
