lilygoLILYGO· Composants électroniques
T3 LoRa32 V1.6.1
Réf. fabricant Q168
17.80 $≈ 15.50 €
Le prix en résumé
Vendu par lilygo à 15.50 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 36.60 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 15.50 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 6.10 € |
| Total livré | 36.60 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 80 g |
Description
Main features: Digital RSSI function Automatic frequency correction Automatic gain control Fast wake-up and frequency hopping Highly configurable data packet handler SMA Antenna Specifications MCU ESP32 Flash 4MB Serial Chip CH9102 Wireless protocol Wi-Fi + Bluetooth 4.2 Support TF card slot Onboard functions Reset \ Power switch Antenna 3D WiFi Antenna [Use by default] LoRa antenna: Support Lora external antenna, but you need to jump resistance Power Supply Support USB Micro / Li-Po Battery Dual Power Supply JST GH 2pin 1.25mm [USB can power the battery] Tech Support ℹ️Product Information Check out our GitHub repository for sample code and more detailed information about this board. ESP32-Paxcounter LILYGO-LoRa-Series 💻Technical support Visit our GitHub community, post a description of the problem and our engineers will help you directly. LILYGO Support Disaster-Radio ℹ️MySondy GO Site Community App for IOS App for Androin Note : Pay attention to the OLED when opening the box. Long Range Low Power LoRa Transceiver High sensitivity: -i48dBm Transceive rate: 300 kbps Optional Hardware Version: SX1278[433Mhz] / SX1276[868/915Mhz] LoRa32 V1.6.1 Paxcounter is an ESP32 MCU-based program for metering passenger flows in realtime. It counts how many mobile devices are around. This gives an estimation how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC adresses. Intention of this project is to do this without intrusion in privacy: You don't need to track people owned devices, if you just want to count them. Paxcounter does not persistenly store MAC adresses and does no kind of fingerprinting the scanned devices. Data can either be be stored on a local SD-card, transferred to cloud using LoRa WAN network or MQTT over TCP/IP, or transmitted to a local host using serial (SPI) interface. Disaster.radio is an off-grid, solar-powered, long-range mesh network built on free, open source software an
Produits similaires
PololuEn stock
Magnetic Encoder Pair Kit with Side-Entry Connector for Mini Plastic Gearmotor, 12 CPR, 2.7-18V
7.80 €8.95 $
Voir chez le vendeur ↗
PololuEn stock
Magnetic Encoder Pair Kit with Top-Entry Connector for Mini Plastic Gearmotor, 12 CPR, 2.7-18V
7.80 €8.95 $
Voir chez le vendeur ↗
AmazonEn stock
Yeebline USB C Male 2 Pin Bare Cable, 4-Pack 11inch 20AWG Replacement USB Type C Male Plug to 2Pin Wire DIY Pigtail Cable Extension Power Cord Open End Adapter Connector 5V 5A
7.70 €Noté 4.8 sur 5, 0 avis
Voir chez le vendeur ↗
AmazonEn stock
20AWG USB C Male 2-Pin Bare Wire Open-End 5V 5A Pigtail Cable 1FT 5PCS
6.84 €Noté 4.7 sur 5, 0 avis
Voir chez le vendeur ↗
