Manufacturer part no. Q168
Listed by lilygo at €15.43. Delivered to France, including shipping, VAT and any customs duty, it comes to about €36.52. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €15.43 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.09 |
| Total delivered | €36.52 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 80 g |
Main features: Digital RSSI function Automatic frequency correction Automatic gain control Fast wake-up and frequency hopping Highly configurable data packet handler SMA Antenna Specifications MCU ESP32 Flash 4MB Serial Chip CH9102 Wireless protocol Wi-Fi + Bluetooth 4.2 Support TF card slot Onboard functions Reset \ Power switch Antenna 3D WiFi Antenna [Use by default] LoRa antenna: Support Lora external antenna, but you need to jump resistance Power Supply Support USB Micro / Li-Po Battery Dual Power Supply JST GH 2pin 1.25mm [USB can power the battery] Tech Support ℹ️Product Information Check out our GitHub repository for sample code and more detailed information about this board. ESP32-Paxcounter LILYGO-LoRa-Series 💻Technical support Visit our GitHub community, post a description of the problem and our engineers will help you directly. LILYGO Support Disaster-Radio ℹ️MySondy GO Site Community App for IOS App for Androin Note : Pay attention to the OLED when opening the box. Long Range Low Power LoRa Transceiver High sensitivity: -i48dBm Transceive rate: 300 kbps Optional Hardware Version: SX1278[433Mhz] / SX1276[868/915Mhz] LoRa32 V1.6.1 Paxcounter is an ESP32 MCU-based program for metering passenger flows in realtime. It counts how many mobile devices are around. This gives an estimation how many people are around. Paxcounter detects Wifi and Bluetooth signals in the air, focusing on mobile devices by evaluating their MAC adresses. Intention of this project is to do this without intrusion in privacy: You don't need to track people owned devices, if you just want to count them. Paxcounter does not persistenly store MAC adresses and does no kind of fingerprinting the scanned devices. Data can either be be stored on a local SD-card, transferred to cloud using LoRa WAN network or MQTT over TCP/IP, or transmitted to a local host using serial (SPI) interface. Disaster.radio is an off-grid, solar-powered, long-range mesh network built on free, open source software an
