radiomasterRadioMaster
RP2 V2 ExpressLRS 2.4ghz Nano Receiver
Réf. fabricant HP0157.RX-RP2-V2
18.99 $≈ 16.46 €
Le prix en résumé
Vendu par radiomaster à 16.46 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 37.75 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 16.46 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 6.29 € |
| Total livré | 37.75 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 100 g |
Description
The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience. The RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing. The RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone. Thanks to the low-latency, high-refresh-rate RF module, the RP1 and RP2 deliver ultra-responsive performance. Their ultra-light, nano-sized design makes them suitable for a wide range of applications, fitting just about anywhere! Visit https://www.expresslrs.org/ to learn more. Features Improved PCB design is better for heat dissipation. LED on the top side of PCB. Solder pads are improved and easier to solder to. Built-in a TCXO (temperature compensated crystal oscillator) Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specification Item: RP2 Nano ExpressLRS 2.4ghz Receiver Type: ISM MCU: EPS8285 RF Chip: SEMTECH SX1281 Telemetry RF power: 10mW Antenna: On Board SMT Antenna Antenna: 65mm 2.4ghz T Antenna Frequency Range: 2.404 - 2.479 Ghz Maximum receive refresh rate: 500Hz/F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 0.55g (On Board antenna) Dimension: 13mm*11mm*7mm Firmware Version: ExpressLRS v2.4 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for
Produits similaires
radiomasterEn stock
[Pre-order] ER12 PWM - Dual-Band GEMINI and GEMINI-X Receiver
51.99 €59.99 $
Voir chez le vendeur ↗
radiomasterEn stock
[Pre-order] ER16 PWM - Dual-Band GEMINI and GEMINI-X Receiver
69.32 €79.99 $
Voir chez le vendeur ↗
