radiomasterRadioMaster
RP2 V2 ExpressLRS 2.4ghz Nano Receiver
Manufacturer part no. HP0157.RX-RP2-V2
$18.99≈ 16.46 €
Price summary
Listed by radiomaster at €16.46. Delivered to France, including shipping, VAT and any customs duty, it comes to about €37.75. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €16.46 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.29 |
| Total delivered | €37.75 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 100 g |
Description
The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience. The RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing. The RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone. Thanks to the low-latency, high-refresh-rate RF module, the RP1 and RP2 deliver ultra-responsive performance. Their ultra-light, nano-sized design makes them suitable for a wide range of applications, fitting just about anywhere! Visit https://www.expresslrs.org/ to learn more. Features Improved PCB design is better for heat dissipation. LED on the top side of PCB. Solder pads are improved and easier to solder to. Built-in a TCXO (temperature compensated crystal oscillator) Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specification Item: RP2 Nano ExpressLRS 2.4ghz Receiver Type: ISM MCU: EPS8285 RF Chip: SEMTECH SX1281 Telemetry RF power: 10mW Antenna: On Board SMT Antenna Antenna: 65mm 2.4ghz T Antenna Frequency Range: 2.404 - 2.479 Ghz Maximum receive refresh rate: 500Hz/F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 0.55g (On Board antenna) Dimension: 13mm*11mm*7mm Firmware Version: ExpressLRS v2.4 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF TCXO (temperature compensated crystal oscillator) The TCXO ensures high stability and accuracy in frequency control, compensating for
Similar products
radiomasterIn stock
[Pre-order] ER12 PWM - Dual-Band GEMINI and GEMINI-X Receiver
€51.99$59.99
View at seller ↗
radiomasterIn stock
[Pre-order] ER16 PWM - Dual-Band GEMINI and GEMINI-X Receiver
€69.32$79.99
View at seller ↗
