
Réf. fabricant 00313342
Vendu par betafpv à 14.80 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 35.76 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 14.80 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 5.96 € |
| Total livré | 35.76 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 40 g |
Note: The DSMX micro receiver (white color) shown above is now replaced by the new DSMX micro receiver (black color). The binding procedure of both micro receivers is same. Specification Input power: 5V Frame rate: 22ms/11ms Resolution: 2048 Working current: 60MA Weight: 0.6 g Receive sensitivity: -108DBM Delay: <15ms Antenna length: 80MM Antenna Data format: DSMX Distance: 300m Channels: support 6-8 channels Compatible Transmitters: DSM2 / DSMX series of remote transmitter This is the connection diagram with on the 2S Whoop FC board on Beta65X and Beta75X. Binding Procedure Connet the receiver to FC and run the Betaflight. On Betaflight GUI, configure the UART1 port to serial port in Ports tab. Then click the Save and Reboot button in the lower right corner. In the Configuration tab, for Receiver Mode, choose Serial_based receiver (SPEKSAT, SBUS, SUMD); Serial Receiver Provider, choose SPEKTRUM2048. And click the Save and Reboot button in the lower right corner. Type: set spektrum_sat_bind=9 in CLI and save. Repower the receiver. The light on the receiver will flash rapidly, which means it's on binding mode. Turn on the radio and select bind mode. Wait a moment. It means bind successfully if the light on receiver keeps brighting. Package 1 * BETAFPV Micro DSMX Receiver (Include antenna) 1 * Clear heatshrink tubing 1 * Silicone Wire (Black) 1 * Silicone Wire (Red) 1 * Silicone Wire (Yellow)