
Manufacturer part no. 00313342
Listed by betafpv at €14.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €35.66. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €14.72 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.94 |
| Total delivered | €35.66 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 40 g |
Note: The DSMX micro receiver (white color) shown above is now replaced by the new DSMX micro receiver (black color). The binding procedure of both micro receivers is same. Specification Input power: 5V Frame rate: 22ms/11ms Resolution: 2048 Working current: 60MA Weight: 0.6 g Receive sensitivity: -108DBM Delay: <15ms Antenna length: 80MM Antenna Data format: DSMX Distance: 300m Channels: support 6-8 channels Compatible Transmitters: DSM2 / DSMX series of remote transmitter This is the connection diagram with on the 2S Whoop FC board on Beta65X and Beta75X. Binding Procedure Connet the receiver to FC and run the Betaflight. On Betaflight GUI, configure the UART1 port to serial port in Ports tab. Then click the Save and Reboot button in the lower right corner. In the Configuration tab, for Receiver Mode, choose Serial_based receiver (SPEKSAT, SBUS, SUMD); Serial Receiver Provider, choose SPEKTRUM2048. And click the Save and Reboot button in the lower right corner. Type: set spektrum_sat_bind=9 in CLI and save. Repower the receiver. The light on the receiver will flash rapidly, which means it's on binding mode. Turn on the radio and select bind mode. Wait a moment. It means bind successfully if the light on receiver keeps brighting. Package 1 * BETAFPV Micro DSMX Receiver (Include antenna) 1 * Clear heatshrink tubing 1 * Silicone Wire (Black) 1 * Silicone Wire (Red) 1 * Silicone Wire (Yellow)