betafpvBetaFPV
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
Réf. fabricant 00313206
26.99 $36.99 $−27 %≈ 23.39 €
Le prix en résumé
Vendu par betafpv à 23.39 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 46.07 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 23.39 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 7.68 € |
| Total livré | 46.07 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 30 g |
Description
This F3 FC board with OSD is on clearance sale. Thanks Downtown FPV for making this review video for us. V2 version is available now and there are 3 improvements based on the most popular F3 whoop Flight Controller. 30A continuous drain current MOSFET. Lower to 8.5mΩ inner resistance value (4.5V). It has a noticeable power improvement in low battery voltage status or with 8x20/8.5x20 motors. TX1 is available for VTX control. You could change VTX settings such as channel and output power in your Betaflight OSD or using your Taranis LUA Script. Here is the diagram when using the TBS Unify PRO Nano 5.8G VTX. Polarity reversed connection protection. Battery polar reversed connected. Bomb. This issue will never happens. Key Features The world's first compatible BetaFlight OSD, FrSky Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Drone or Blade Inductrix setups Built in Frsky D8 protocol native receiver (SBUS), compatible with almost ALL Frsky radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F303CCT6 Six-Axis: MPU6000 ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern Firmware version: BETAFLIGHTF3 3.2.0 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: Frsky D8 potocol (SBUS) Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.5g BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that sh
Produits similaires
betafpvDispo. inconnue
F3 EVO Brushed Flight Controller (Frsky Rx)
17.32 €19.99 $
Voir chez le vendeur ↗
betafpvDispo. inconnue
F3 Brushed Flight Controller (DSMX Rx + OSD)
38.99 €44.99 $
Voir chez le vendeur ↗
