betafpvBetaFPV
F3 Brushed Flight Controller (DSMX Rx + OSD)
Réf. fabricant 00313019
44.99 $≈ 38.99 €
Le prix en résumé
Vendu par betafpv à 38.99 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 64.79 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 38.99 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 10.80 € |
| Total livré | 64.79 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 30 g |
Description
The world's first whoop FC with DSMX Rx and Betaflight OSD integrated. Tip: NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. Key Features The world's first compatible BetaFlight OSD, DSMX Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Quadcopter or Blade Inductrix setups Built in DSMX protocol native receiver (SBUS), compatible with almost ALL Spektrum radios(e.g. Spektrum DX6/DX6i/DX8...) or DSMX compatible transmitter module The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F303CCT6 Six-Axis: MPU6000 ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern Firmware version: BETAFLIGHTF3 3.1.7 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: DSMX potocol (SBUS) Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.2g BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. How would do an OSD with the AIO cameras? There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. There is some examples. BETAFPV H02 Camera, FX806TC, VM275, FX805, Eachine XT02 etc aio camera vtx
Produits similaires
betafpvDispo. inconnue
F3 EVO Brushed Flight Controller (Frsky Rx)
17.32 €19.99 $
Voir chez le vendeur ↗
betafpvDispo. inconnue
F3 Brushed Flight Controller (Frsky Rx + OSD V2)
23.39 €26.99 $
Voir chez le vendeur ↗
