betafpvBetaFPV
F3 Brushed Flight Controller (DSMX Rx + OSD)
Manufacturer part no. 00313019
$44.99≈ 38.99 €
Price summary
Listed by betafpv at €38.99. Delivered to France, including shipping, VAT and any customs duty, it comes to about €64.79. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €38.99 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €10.80 |
| Total delivered | €64.79 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 30 g |
Description
The world's first whoop FC with DSMX Rx and Betaflight OSD integrated. Tip: NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. Key Features The world's first compatible BetaFlight OSD, DSMX Rx, BetaFlight firmware, born for acro F3 flight controller for the Micro Whoop or Blade Inductrix quadcopter. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings Designed to work with current Whoop Quadcopter or Blade Inductrix setups Built in DSMX protocol native receiver (SBUS), compatible with almost ALL Spektrum radios(e.g. Spektrum DX6/DX6i/DX8...) or DSMX compatible transmitter module The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Specifications CPU: STM32F303CCT6 Six-Axis: MPU6000 ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors. Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern Firmware version: BETAFLIGHTF3 3.1.7 OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode) Receiver: DSMX potocol (SBUS) Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector Weight: 3.2g BetaFlight OSD Betaflight OSD (on screen display) is integrated in BETAFPV F3 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings. How would do an OSD with the AIO cameras? There is a video in and out on the fc itself, labeled CAM and VTX as show below. There should be a video in and out on the AIO camera, like BETAFPV H02 etc. If not, you would have to modify the camera for sure but it would totally be worth it. There is some examples. BETAFPV H02 Camera, FX806TC, VM275, FX805, Eachine XT02 etc aio camera vtx
