holybroHolybro
Pixhawk 6X Pro
Réf. fabricant 11070+18117+15011
797.99 $≈ 691.56 €
Le prix en résumé
Vendu par holybro à 691.56 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 847.87 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 691.56 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 141.31 € |
| Total livré | 847.87 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 400 g |
Description
Key Design Point High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications All-New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications Triple redundant IMU & double redundant barometer on separate buses High-performance STM32H753 Processor Modular flight controller: separated IMU, FMU, and Base system The safety-driven design incorporates sensors from different manufacturers and model lineups Independent LDO powers every sensor with independent power control. Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination). Temperature-controlled IMU board, allowing the optimum working temperature of IMUs Hardware switchable 3.3V or 5V signal mode (requires baseboard modification) All new Vibration Isolation Design This new vibration isolation design uses a custom-formulated, durable silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drones. Note: FC Module + a baseboard is required for this product to function. An FC Module or a Baseboard by itself will not function. Specification Processors & Sensors FMU Processor: STM32H753 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM IO Processor: STM32F103 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM On-board sensors Accel/Gyro: ADIS16470 ±40g, Vibration Isolated, Industrial IMU Accel/Gyro: IIM-42652 ±16g, Vibration Isolated, Industrial IMU Accel/Gyro: ICM-45686 with BalancedGyro™ Technology ±32g, Hard Mounted Barometer: ICP20100 Barometer: BMP388 Mag: BMM150 NXP EdgeLock SE050 Plug & Trust hardware secure element Electric
