holybroHolybro
Pixhawk 6X Pro
Manufacturer part no. 11070+18117+15011
$797.99≈ 690.84 €
Price summary
Listed by holybro at €690.84. Delivered to France, including shipping, VAT and any customs duty, it comes to about €847.01. Prices last checked on 2026-09-15.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €690.84 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €141.17 |
| Total delivered | €847.01 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 400 g |
Description
Key Design Point High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g), perfect for accurate motion sensing in demanding UAV applications All-New advanced durable vibration isolation material with resonance frequency in the higher spectrum, ideal for industrial and commercial drone applications Triple redundant IMU & double redundant barometer on separate buses High-performance STM32H753 Processor Modular flight controller: separated IMU, FMU, and Base system The safety-driven design incorporates sensors from different manufacturers and model lineups Independent LDO powers every sensor with independent power control. Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination). Temperature-controlled IMU board, allowing the optimum working temperature of IMUs Hardware switchable 3.3V or 5V signal mode (requires baseboard modification) All new Vibration Isolation Design This new vibration isolation design uses a custom-formulated, durable silicone-based isolation material in place of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drones. Note: FC Module + a baseboard is required for this product to function. An FC Module or a Baseboard by itself will not function. Specification Processors & Sensors FMU Processor: STM32H753 32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM IO Processor: STM32F103 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM On-board sensors Accel/Gyro: ADIS16470 ±40g, Vibration Isolated, Industrial IMU Accel/Gyro: IIM-42652 ±16g, Vibration Isolated, Industrial IMU Accel/Gyro: ICM-45686 with BalancedGyro™ Technology ±32g, Hard Mounted Barometer: ICP20100 Barometer: BMP388 Mag: BMM150 NXP EdgeLock SE050 Plug & Trust hardware secure element Electric
