holybroHolybro
Kakute H7 Mini
Manufacturer part no. 11082
$58.99≈ 51.07 €
Price summary
Listed by holybro at €51.07. Delivered to France, including shipping, VAT and any customs duty, it comes to about €79.28. Prices last checked on 2026-09-15.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €51.07 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €13.21 |
| Total delivered | €79.28 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 60 g |
Description
Overview The Holybro Kakute H7 Mini is a Flight Controller full of features, including onboard VTX ON/OFF Pit Switch with battery voltage, HD System/VTX & 4in1 ESC plugs, barometer, OSD, 6x UARTs, easy soldering layout, and much more. The Kakute H7 Mini builds upon the best features of its F7 predecessor and further improves on hardware components and layout. HD ready, it has an easy plug to power an HD system like Caddx Vista while supporting an analog system. It features an onboard “VTX ON/OFF Pit Switch” that allows you to completely power off the video transmitter using a switch on your RC transmitter. Great if you are working on your drone, waiting for the GPS to get a fix, getting ready for a race, while preventing it from overheating or interfering with others flying. It has 6x dedicated UART ports with built-in inversion for peripherals, a 4in1 ESC plug, and x8 compatible with M5-M8 Signal Pads, allowing easy support for x8 Octocopter configuration. The integrated BetaFlight OSD makes it easy to display important information on your FPV display like battery voltage, flight time, warnings, RSSI, smart audio features, and more. It is also ready for autonomous flight with the onboard barometer. There is an LED & buzzer pad, an I2C pad (SDA & SCL) for external GPS/Magnetometers. Update: Version 1.5 now has ICM-42688-P IMU. Additional Info can be found on the Holybro Documentation page. Tip: The VTX power switch is controlled by the USER1 mode in Betaflight. If the USER1 mode is not present, enter the following command in the CLI: set pinio_box=40,255,255,255 save Specification: MCU - STM32H743 32-bit processor running at 480 MHz IMU ICM-42688-P (V1.5) BMI270 (V1.3) Barometer - SPA06 OSD - AT7456E Onboard Flash: 128Mbits VTX ON/OFF Pit Switch – Switch can be enabled using USER1 in Betaflight Mode tab. Warning: Do not enable this pit switch if you are using the DJI FPV Remote Controller 6x UARTs (1,2,3,4,6,7) 9x PWM Outputs (8 Motor Outputs, 1 LED) Battery input v
