Réf. fabricant 31097
Vendu par holybro à 82.32 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 116.78 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 82.32 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 19.46 € |
| Total livré | 116.78 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
2 relevés de prix/stock depuis le 20/08/2026
| Courant | 65 A |
| Poids | 80 g |
F4 MCU @150Mhz / Metal-Cased MOSFET / PWM output: 16k ~96k PWM / 4~6S / AM32_Firmware The all new Tekko32 Metal is the first 4in1 ESC in the market to adapt the fast F4 MCU. Powerful & reliable metal-cased MOSFET 4in1 ESC with smooth control and quick response. Features: New & faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz) PWM Frequency: 16k to 96k Metal-cased MOSFET for excellent heat dissipation Massive on-board capacitance for noise filtering at 2068uf 3 oz copper PCB design to allow bigger current and better heat dissipation Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit. Specification: Continuous Current: 65A x4 Burst Current: 75A x4 Supports 4-6S battery Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc. ESC telemetry Supported Onboard analog current sensor No output BEC AM32 firmware (target: AM32_TEKKO32_4IN1_F421) 1000uf 35v capacitor included (highly recommended for 6s setup) Amperage meter scale ratio: 180 Dimensions: 43 x 44mm / Weight: 15.8g Mounting holes: M4 30.5x30.5mm (M3 grommets included) Note: Air flow for the ESC is very important if you want to run this 4in1 in high current. The battery wire (from Lipo to 4in1 ESC) should be at least 12AWG and well soldered. PIN MAP Package included: Tekko32 F4 Metal 4in1 65A ESC *1 M3 Anti-Vibration Silicone Grommet Insert *4 Electrolytic capacitor: 1000uF 35v *1 8pin to 8pin 1mm pitch 65mm cable *1 8pin to 8pin 1mm pitch 25mm cable *1 Downloads: Tekko32 F4 Metal 4in1 ESC(65A) SPEC Some Tips: ESC Current Sensor Scale AM32 ESC Firmware Overview Reference Link AM32 ESC Firmware Overview AM32 ESC Configurator
