Réf. fabricant 31095
Vendu par holybro à 122.19 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 164.63 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 122.19 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 27.44 € |
| Total livré | 164.63 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 50 g |
Specification Continuous Current: 20A Burst Current: 40A Input Voltage: 48V(8S) Hardware based upon the VESC® 6.0 Firmware updatable VESC_TOOL Compatible Software Compatible with Sensored / Sensorless Motor Size: 18mm*65mm Net Weight: 10g/pcs Port Definition: - GND1/2, DP(Data postive), DM(Data Minus/Negative): USB port for programming. - GND1/2, PPM, +5V: PPM port to connect PPM transceivers. - SWC(CLK), SWD(DIO), GND1/2, 5V: SWD port, to get direct access to the Chipset. Diagnostics, debugging, and real time data. - A1(ADC1), A2(ADC2), TX, RX, GND1/2, 5V: COMM port for various kinds of other communication methods like I2C, ADC, Uart. You can use your Arduino or Raspberry Pi to control the VESC. - 5V, TEMP, HAll1, Hall2, Hall3 GND: Sensor port for motor Hall sensors (ABI, HALL, magnetic precision encoders). PS: (GND1 and GND2 are same, for above ports containing GND1/2, you can just select one to use). Package included: SKU31095 Mini FOC ESC 1PC Mini FOC ESC *1 Electrolytic capacito: 220uF 63v *1 DIP Rectifier Diode *1 2.54mm DuPont Wire *1 Clear Heat Shrink Tube*1 16AWG 100mm Red wire *1 16AWG 100mm Black wire *1 SKU20123 Mini FOC ESC 4PCS Mini FOC ESC *4 Electrolytic capacito: 220uF 63v *4 DIP Rectifier Diode *4 2.54mm DuPont Wire *4 Clear Heat Shrink Tube*4 USB to ZH1.5mm 6Pin wire *1 16AWG 100mm Red wire *4 16AWG 100mm Black wire *4 Manual: Holybro Mini FOC ESC Based on VESC®6 Manual Firmware Source Code: https://github.com/vedderb/bldc/ This ESC is manufactured based upon the open hardware design by Anton Chromjak with consent. For more information, please visit: https://vesc-project.com/node/246 https://github.com/antonchromjak/MINI4 Vesc-tool download： https://github.com/rpasichnyk/vesc_tool/releases
