racedayquadsLumenier
Lumenier LUX H743 Flight Controller - NDAA
Réf. fabricant G23448US1Z
177.30 $≈ 154.43 €
Le prix en résumé
Vendu par racedayquads à 154.43 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 203.32 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Disponibilité inconnue
Coût total livré estimé
| Article | 154.43 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 33.89 € |
| Total livré | 203.32 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 50 g |
Description
The Lumenier LUX H743 – NDAA Flight Controller features some of the latest sensors in drone technology, including the next-generation InvenSense ICM-45686 Gyro/Accelerometer, Infineon DPS368 barometer, and STMicroelectronics LIS2MDL magnetometer. Additionally, the LUX H743–NDAA features several differentiating characteristics, including a camera feed switch that allows toggling between two independent video streams. Make sure to check out our other Flight Controllers and our Lumenier product selection! Features Dual Gyro/Accelerometer Sensors with Synchronization Clock Signal and Independent Power Supplies Supported Firmware - Betaflight, INAV, Ardupilot, and PX4 7 UART Ports, Including 2 UARTs with Flow Control Internal Magnetometer NDAA Compliant LED supported Specifications Input Voltage: 3S to 8S MCU: ST STM32H743, ARM® Cortex®- M7, 480MHz, 1MB RAM, 2MB Flash Gyro/Accelerometer #1: Invensense ICM-45686 Gyro/Accelerometer #2: Invensense ICM-42688-P Barometer: Infineon DPS368 Magnetometer: STMicroelectronics LIS2MDL Flash Storage: Windbond W25Q128JV (128Mbit) OSD: AT7456E Size: 37.5mm x 37.5mm Mounting holes: 30.5mm x 30.5mm External Sensors: I2C Ports CANbus Support: PX4 and Ardupilot only LED Strip Control: WS2812 Voltage regulators: +5V Regulator for Accessories, +10V Regulator for VTX Power Camera Control Output: Supported Dual Camera Switch: Supported VTX Power Switch: Supported RX PPM Input: Supported Analog Battery Sensor Input: 8S and 12S Inputs Analog Current Sensor Input: Supported Blackbox Storage: SD Card and Flash USB: Type-C (2.0) Pixhawk Telemetry: GPS and CAN Ports Important Notes When using Ardupilot or PX4 builds, an SD card is required to boot after firmware installation. Links MANUAL Lumenier LUX H743 FC Manual NDAA DECLARATION Lumenier NDAA Product Declaration - LUX H743 Flight Controller FIRMWARE PX4: Firmware Install INAV: Firmware Install Betaflight: Firmware Install Ardupilot: Firmware Install Includes 1x Lumenier LUX H743 Flight Controlle
Produits similaires
racedayquadsEn stock
Aikon F7 Mini V3.1 HD 20x20 Flight Controller
72.55 €83.29 $
Voir chez le vendeur ↗
racedayquadsEn stock
SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
60.11 €69.01 $
Voir chez le vendeur ↗
racedayquadsEn stock
SkyStarsRC H7 Single Gyro 2-6S 30x30 Flight Controller
77.21 €88.64 $
Voir chez le vendeur ↗
racedayquadsEn stock
AxisFlying Argus F7 HD 3-6S 30x30 Flight Controller
74.62 €85.67 $
Voir chez le vendeur ↗
