racedayquadsLumenier
Lumenier LUX H743 Flight Controller - NDAA
Manufacturer part no. G23448US1Z
$177.30≈ 153.65 €
Price summary
Listed by racedayquads at €153.65. Delivered to France, including shipping, VAT and any customs duty, it comes to about €202.38. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Availability unknown
Estimated landed cost
| Item | €153.65 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €33.73 |
| Total delivered | €202.38 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 50 g |
Description
The Lumenier LUX H743 – NDAA Flight Controller features some of the latest sensors in drone technology, including the next-generation InvenSense ICM-45686 Gyro/Accelerometer, Infineon DPS368 barometer, and STMicroelectronics LIS2MDL magnetometer. Additionally, the LUX H743–NDAA features several differentiating characteristics, including a camera feed switch that allows toggling between two independent video streams. Make sure to check out our other Flight Controllers and our Lumenier product selection! Features Dual Gyro/Accelerometer Sensors with Synchronization Clock Signal and Independent Power Supplies Supported Firmware - Betaflight, INAV, Ardupilot, and PX4 7 UART Ports, Including 2 UARTs with Flow Control Internal Magnetometer NDAA Compliant LED supported Specifications Input Voltage: 3S to 8S MCU: ST STM32H743, ARM® Cortex®- M7, 480MHz, 1MB RAM, 2MB Flash Gyro/Accelerometer #1: Invensense ICM-45686 Gyro/Accelerometer #2: Invensense ICM-42688-P Barometer: Infineon DPS368 Magnetometer: STMicroelectronics LIS2MDL Flash Storage: Windbond W25Q128JV (128Mbit) OSD: AT7456E Size: 37.5mm x 37.5mm Mounting holes: 30.5mm x 30.5mm External Sensors: I2C Ports CANbus Support: PX4 and Ardupilot only LED Strip Control: WS2812 Voltage regulators: +5V Regulator for Accessories, +10V Regulator for VTX Power Camera Control Output: Supported Dual Camera Switch: Supported VTX Power Switch: Supported RX PPM Input: Supported Analog Battery Sensor Input: 8S and 12S Inputs Analog Current Sensor Input: Supported Blackbox Storage: SD Card and Flash USB: Type-C (2.0) Pixhawk Telemetry: GPS and CAN Ports Important Notes When using Ardupilot or PX4 builds, an SD card is required to boot after firmware installation. Links MANUAL Lumenier LUX H743 FC Manual NDAA DECLARATION Lumenier NDAA Product Declaration - LUX H743 Flight Controller FIRMWARE PX4: Firmware Install INAV: Firmware Install Betaflight: Firmware Install Ardupilot: Firmware Install Includes 1x Lumenier LUX H743 Flight Controlle
Similar products
racedayquadsIn stock
SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
€59.81$69.01
View at seller ↗
racedayquadsIn stock
SkyStarsRC H7 Single Gyro 2-6S 30x30 Flight Controller
€76.82$88.64
View at seller ↗
