racedayquadsHAPPYMODEL· Commande de moteurs
Happymodel SuperX AIO V2 - F4 + 5A 1S BLHeli_S ESC + ELRS 2.4GHz
Réf. fabricant 23189
99.95 $≈ 86.62 €
Réf. fabricant 23189
Vendu par racedayquads à 86.62 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 121.94 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 86.62 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 20.32 € |
| Total livré | 121.94 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 5 A |
| Poids | 23 g |
The Happymodel SuperX F4 5A AIO V2 is an all-in-one flight controller built for 1S micro drones, combining an F4 MCU, 5A BLHeli_S ESCs, ExpressLRS 2.4GHz receiver, 5.8GHz OpenVTX (up to 400mW), and Betaflight OSD in a compact 25.5x25.5mm layout. With support for Bluejay firmware, MSP VTX control, and wireless updates via WiFi, it offers reliable performance and easy setup for ultralight FPV builds. Check out our other whoop flight controllers, and the rest of our Happymodel offerings. Features Compact and Lightweight F4 Flight Controller High Compatibility Ideal for Upgrades All-in-One Design 5A BLHeli_S ESC A30 Connector Specifications ELRS RECEIVER ExpressLRS Firmware Target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher) Firmware Update: Can flash single ELRS receiver firmware via Wi-Fi Compatibility: Compatible with ExpressLRS V3.x.x TX Module Packet Rate Option: 50Hz/150Hz/250Hz/500Hz Available From: ExpressLRS version 3.4.0 RC2 Antenna: Enameled copper wire antenna Receiver Protocol: Serial-based CRSF ExpressLRS Firmware Version: V3.0 Telemetry Output Power: <12dBm RF Frequency: 2.4GHz FLIGHT CONTROLLER MCU: STM32F411CEU6 (100MHz, 512K FLASH), ESP32-PICO-D4 Built-in Current Meter Sensor: Current meter scale 1175 Built-in Voltage Meter Sensor: Voltage meter scale 110 Built-in 5.8G OpenVTX: 0mw~400mw (MSP control) Power Supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A (each) BLHeli_S: 4-in-1 ESC Built-in Betaflight OSD: (SPI Control) Mount Hole Size: 25.5mm x 25.5mm Sensor: BMI270 (SPI connection) Built-in UART: ExpressLRS v3.0.0 ESC Recommended ESC Startup Power Value: Min 1100 / Max 1200 Current: 5A continuous, peak 6A (3 seconds) Support: BLHeliSuite programmable Factory Firmware: Bluejay v0.19.2 Power Supply: 1S LiPo/LiPo HV Firmware Target: O-H-5 48kHz Default Protocol: DSHOT300 5.8GHz VTX Transmitting Power: 0/RCE/25mw/100mw/400mw Current (5V): <650mA (400mw) Firmware Version: OPENVTX Antenna Connector: U.FL Power Supply: DC 5V PIT Mode: Support
