
Réf. fabricant 22539
Vendu par racedayquads à 142.31 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 188.77 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 142.31 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 31.46 € |
| Total livré | 188.77 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 73 g |
Introducing the Mobula6 2024 1S 65mm ultra-light micro FPV Whoop from Happymodel! Equipped with a powerful AIO with ELRS 2.4GHz and 5.8GHz Openvtx built in. At just 17.7 grams, it is one of the lightest whoops, powered by SE0702 brushless motors its ready to be sent. Its compact design allows this to be an indoor or outdoor whoop. Elevate your FPV journey with the Mobula6 2024, whether you're a seasoned pilot or just starting. Check out our other pre-built quads, as well as the rest of our HappyModel selection! Features FX17-B 1/3 CMOS 800TVL Analog FPV Camera Integrated OpenVTX 5.8GHz Video Transmitter Designed for indoor freestyle and micro racing Lightweight SE0702 1.46g Brushless Motors Compatible with 1S LiPo / LiHV batteries SuperX ELRS V2.0 AIO Flight Controller Smooth and agile flight performance Built-in Serial ELRS 2.4GHz Receiver Plug-and-play motor connectors Specifications Flight Controller (SuperX ELRS AIO 5-in-1) MCU: STM32F411CEU6 (100MHz, 512K Flash), ESP32-PICO-D4 Gyro: BMI270 or ICM42688P (SPI) Mounting: 25.5mm × 25.5mm Power Supply: 1S (DC 2.9V–4.35V) Integrated Components: 5A (each) BLHeli_S 4-in-1 ESC Betaflight OSD (SPI control) 5.8GHz OpenVTX (0–400mW, MSP control) UART ExpressLRS v3.0.0 Receiver Voltage Meter (Scale: 110) Current Meter (Scale: 1175) 4-in-1 ESC (Onboard) Power Supply: 1S LiPo / LiHV Current: 5A continuous / 6A peak (3s) Firmware: Bluejay v0.19.2 Protocol: DSHOT300 Programmable via BLHeliSuite Recommended Startup Power: Min 1100 / Max 1200 Onboard Serial ExpressLRS Receiver Packet Rates: 50Hz / 150Hz / 250Hz / 500Hz Firmware: ExpressLRS v3.0 Frequency: 2.4GHz Antenna: Enameled copper wire Telemetry Output Power: <12dBm Protocol: Serial-based CRSF Firmware Target: HappyModel AIO 2.4GHz RX+VTX Flashable via Wi-Fi Supported from ELRS v3.4.0 RC2 5.8GHz VTX (Onboard) Firmware: OPENVTX Control: MSP VTX PIT Mode Support: Yes Channels: 40 Power Levels: 0 / RCE / 25mW / 100mW / 400mW Supply Voltage: DC 5V Current Draw (400mW): <650mA A



