racedayquadsHAPPYMODEL· Robots & kits
Happymodel Mobula6 2024 1S 65mm Micro Whoop Analog - UART ELRS 2.4GHz (Motor Plug)
Manufacturer part no. 22539
$164.21≈ 142.31 €
Price summary
Listed by racedayquads at €142.31. Delivered to France, including shipping, VAT and any customs duty, it comes to about €188.77. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €142.31 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €31.46 |
| Total delivered | €188.77 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 73 g |
Description
Introducing the Mobula6 2024 1S 65mm ultra-light micro FPV Whoop from Happymodel! Equipped with a powerful AIO with ELRS 2.4GHz and 5.8GHz Openvtx built in. At just 17.7 grams, it is one of the lightest whoops, powered by SE0702 brushless motors its ready to be sent. Its compact design allows this to be an indoor or outdoor whoop. Elevate your FPV journey with the Mobula6 2024, whether you're a seasoned pilot or just starting. Check out our other pre-built quads, as well as the rest of our HappyModel selection! Features FX17-B 1/3 CMOS 800TVL Analog FPV Camera Integrated OpenVTX 5.8GHz Video Transmitter Designed for indoor freestyle and micro racing Lightweight SE0702 1.46g Brushless Motors Compatible with 1S LiPo / LiHV batteries SuperX ELRS V2.0 AIO Flight Controller Smooth and agile flight performance Built-in Serial ELRS 2.4GHz Receiver Plug-and-play motor connectors Specifications Flight Controller (SuperX ELRS AIO 5-in-1) MCU: STM32F411CEU6 (100MHz, 512K Flash), ESP32-PICO-D4 Gyro: BMI270 or ICM42688P (SPI) Mounting: 25.5mm × 25.5mm Power Supply: 1S (DC 2.9V–4.35V) Integrated Components: 5A (each) BLHeli_S 4-in-1 ESC Betaflight OSD (SPI control) 5.8GHz OpenVTX (0–400mW, MSP control) UART ExpressLRS v3.0.0 Receiver Voltage Meter (Scale: 110) Current Meter (Scale: 1175) 4-in-1 ESC (Onboard) Power Supply: 1S LiPo / LiHV Current: 5A continuous / 6A peak (3s) Firmware: Bluejay v0.19.2 Protocol: DSHOT300 Programmable via BLHeliSuite Recommended Startup Power: Min 1100 / Max 1200 Onboard Serial ExpressLRS Receiver Packet Rates: 50Hz / 150Hz / 250Hz / 500Hz Firmware: ExpressLRS v3.0 Frequency: 2.4GHz Antenna: Enameled copper wire Telemetry Output Power: <12dBm Protocol: Serial-based CRSF Firmware Target: HappyModel AIO 2.4GHz RX+VTX Flashable via Wi-Fi Supported from ELRS v3.4.0 RC2 5.8GHz VTX (Onboard) Firmware: OPENVTX Control: MSP VTX PIT Mode Support: Yes Channels: 40 Power Levels: 0 / RCE / 25mW / 100mW / 400mW Supply Voltage: DC 5V Current Draw (400mW): <650mA A
Similar products
racedayquadsIn stock
DeepSpace DINO 20 Drone HD w/ DJI O4 Wide - 3S - ELRS 2.4GHz
€333.61$384.95
View at seller ↗
racedayquadsIn stock
Flywoo FireFly16 V3 Drone HD w/ DJI O4 Wide - 1S - DJI PNP
€276.38$318.91
View at seller ↗
racedayquadsIn stock
Flywoo Flylens 75 V1.3 Drone HD w/ DJI O4 Wide - 2S - TBS Crossfire
€342.89$395.66
View at seller ↗
