racedayquadsSKYSTARSRC· Commande de moteurs
SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM50 32Bit 50A 4in1 ESC)
Réf. fabricant 19933
Réf. fabricant 19933
Vendu par racedayquads à 122.71 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 165.25 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 122.71 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 27.54 € |
| Total livré | 165.25 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 50 A |
| Poids | 73 g |
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a Kramam KM50 Pro 50A BLHeli_32 4in1 ESC with a 30x30 mounting pattern! Check out our other 30x30 Stacks, and our SkyStarsRC collection! Features F722 HD Pro3 OSD Flight Controller KM50 Pro 50A ESC with heatsink Betaflight OSD & DJI HD OSD 30x30 Mounting Pattern 3-6S LiPo Support Barometer Specification F722 HD PRO 3 OSD FLIGHT CONTROLLER Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1) Installation size: 30.5mm × 30.5mm (The installation hole is M4 and supports shock column installation) BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI LED: 4 LED independent pads, support WS2812 programming lamp output. 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) OSD: Betaflight SPI OSD DJI HD OSD(UART6) BetaFlight firmware: SKYSTARSF722Pro INAV firmware: SKYSTARSF722HD MCU: STM32F722RGT6 216MHz External size: 39mm × 39mm 6x Uarts: UART 1/2/3/4/5/6 USB Type: Type-C (USB2.0) Flight control weight: 6.9g LDO 3.3V: Max.250mA Barometer: Bmp280 Input voltage: 3-6S Gyroscope: BMI270 Black box: 16MB PWM outputs: 4 I2C: 1 KRAMAM KM50 PRO 50A 4-IN-1 ESC Mounting Hole Pattern : 30.5mm / M3 Input voltage : 3-6S LiPo / LiHV ESC Protocol: Dshot 600/1200 Product size: 41x46x7.6mm Overcurrent Protection: Yes Continuous Current: 50A Peak Current: 60A (10S) Firmware: Blheli_32 Weight: 17g BEC: NO Includes 1x SkyStars Fly Stack - F722 HD Pro 3 OSD FC + KM50 Pro 50A 3-6S 4-in-1 BLHeli_32 ESC - 30x30 2x 8pin wiring harness (1x 70mm,1x 50mm) 4x Rubber Dampers (M3x3.5mm) 1x XT60 connector and wires 1x 35v 560uf Capacitor
