racedayquadsSKYSTARSRC· Motor control
SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM50 32Bit 50A 4in1 ESC)
Manufacturer part no. 19933
Manufacturer part no. 19933
Listed by racedayquads at €122.71. Delivered to France, including shipping, VAT and any customs duty, it comes to about €165.25. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €122.71 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €27.54 |
| Total delivered | €165.25 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 50 A |
| Weight | 73 g |
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a Kramam KM50 Pro 50A BLHeli_32 4in1 ESC with a 30x30 mounting pattern! Check out our other 30x30 Stacks, and our SkyStarsRC collection! Features F722 HD Pro3 OSD Flight Controller KM50 Pro 50A ESC with heatsink Betaflight OSD & DJI HD OSD 30x30 Mounting Pattern 3-6S LiPo Support Barometer Specification F722 HD PRO 3 OSD FLIGHT CONTROLLER Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1) Installation size: 30.5mm × 30.5mm (The installation hole is M4 and supports shock column installation) BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI LED: 4 LED independent pads, support WS2812 programming lamp output. 1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr) LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V) OSD: Betaflight SPI OSD DJI HD OSD(UART6) BetaFlight firmware: SKYSTARSF722Pro INAV firmware: SKYSTARSF722HD MCU: STM32F722RGT6 216MHz External size: 39mm × 39mm 6x Uarts: UART 1/2/3/4/5/6 USB Type: Type-C (USB2.0) Flight control weight: 6.9g LDO 3.3V: Max.250mA Barometer: Bmp280 Input voltage: 3-6S Gyroscope: BMI270 Black box: 16MB PWM outputs: 4 I2C: 1 KRAMAM KM50 PRO 50A 4-IN-1 ESC Mounting Hole Pattern : 30.5mm / M3 Input voltage : 3-6S LiPo / LiHV ESC Protocol: Dshot 600/1200 Product size: 41x46x7.6mm Overcurrent Protection: Yes Continuous Current: 50A Peak Current: 60A (10S) Firmware: Blheli_32 Weight: 17g BEC: NO Includes 1x SkyStars Fly Stack - F722 HD Pro 3 OSD FC + KM50 Pro 50A 3-6S 4-in-1 BLHeli_32 ESC - 30x30 2x 8pin wiring harness (1x 70mm,1x 50mm) 4x Rubber Dampers (M3x3.5mm) 1x XT60 connector and wires 1x 35v 560uf Capacitor
