
Manufacturer part no. 18166
Listed by racedayquads at €160.70. Delivered to France, including shipping, VAT and any customs duty, it comes to about €210.84. Prices last checked on 2026-09-15.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €160.70 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €35.14 |
| Total delivered | €210.84 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Current | 55 A |
| Weight | 32 g |
The V1.2 of the iFlight Blitz F7 E55 2-6S 30x30 Stack/Combo has arrived. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. They also make diagnosing issues in the field much easier with status indicator LED's that let you know in seconds if you are having a problem with the 3.3V, 5V, or VBat. Coupled with iFlight's new 55 Amp BLHeli_32 Blitz 4-in-1 ESC, this stack can handle even the most amp hungry motors. Check out our other 30x30 Stacks & Combos as well as our entire iFlight selection! Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging With LC filter Specification Jan. 12, 2024: Gyroscope changed from BMI270 to ICM42688. Product name updated to BLITZ F7 V1.2 Flight Controller. Blitz F7 V1.2 MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Mount pattern: 30.5x30.5mm / 4mm PCB hole diameter Dimensions: 36.5x35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A E55 4in1 ESC Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 65A MCU: G071 BEC: No Firmware: BLHeli32 Current Sensor: Yes Target: IFLIGHT_BLITZ_G2 Mounting Dimensions: 30.5x30.5mm/Φ4mm Dimensions: 35x42mm Weight: 15.3g Includes 1x iFlight Blitz F7 V1.2 2-6S 30x30 Stack/Combo (F7 FC/ E55 32Bit 55A 4in1 ESC) 1x XT60 Pigtail



