racedayquadsHAPPYMODEL· Commande de moteurs
Happymodel SuperX AIO - F4 FC + 5A 1S BLHeli_S ESC
Réf. fabricant 21877
99.95 $≈ 86.62 €
Réf. fabricant 21877
Vendu par racedayquads à 86.62 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 121.94 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 86.62 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 20.32 € |
| Total livré | 121.94 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 5 A |
| Poids | 23 g |
The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC. This powerful AIO provides exceptional flight performance, making it ideal for ultralight whoops and other micro drones. The F4 FC is responsive, while the 5A ESC, with BLHeli_S, provides reliable power delivery. Its light as a feather, packed with features, the SuperX AIO is perfect for an upgrade or your next micro! Check out our other whoop flight controllers, and the rest of our Happymodel offerings. Features Compact and Lightweight F4 Flight Controller Ideal for Upgrades 5A BLHeli_S ESC Specifications ELRS RECEIVER ExpressLRS Firmware Target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher) Firmware Update: Can flash single ELRS receiver firmware via Wi-Fi Compatibility: Compatible with ExpressLRS V3.x.x TX Module Packet Rate Option: 50Hz/150Hz/250Hz/500Hz Available From: ExpressLRS version 3.4.0 RC2 Antenna: Enameled copper wire antenna Receiver Protocol: Serial-based CRSF ExpressLRS Firmware Version: V3.0 Telemetry Output Power: <12dBm RF Frequency: 2.4GHz FLIGHT CONTROLLER MCU: STM32F411CEU6 (100MHz, 512K FLASH), ESP32-PICO-D4 Built-in Current Meter Sensor: Current meter scale 1175 Built-in Voltage Meter Sensor: Voltage meter scale 110 Built-in 5.8G OpenVTX: 0mw~400mw (MSP control) Power Supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A (each) BLHeli_S: 4-in-1 ESC Built-in Betaflight OSD: (SPI Control) Mount Hole Size: 25.5mm x 25.5mm Sensor: BMI270 (SPI connection) Built-in UART: ExpressLRS v3.0.0 ESC Recommended ESC Startup Power Value: Min 1100 / Max 1200 Current: 5A continuous, peak 6A (3 seconds) Support: BLHeliSuite programmable Factory Firmware: Bluejay v0.19.2 Power Supply: 1S LiPo/LiPo HV Firmware Target: O-H-5 48kHz Default Protocol: DSHOT300 5.8GHz VTX Transmitting Power: 0/RCE/25mw/100mw/400mw Current (5V): <650mA (400mw) Firmware Version: OPENVTX Antenna Connector: U.FL Power Supply: DC 5V PIT Mode: Support Channels: 40ch VTX: MSP Includes 1x Happymodel
