racedayquadsLumenier· Commande de moteurs
Lumenier LUX HD G4 AIO Whoop/Toothpick Flight Controller (w/ 35A AM32 4in1 ESC)
Réf. fabricant 22320
139.22 $≈ 120.65 €
Le prix en résumé
Vendu par racedayquads à 120.65 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 162.78 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 120.65 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 27.13 € |
| Total livré | 162.78 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Électrique
| Courant | 35 A |
Mécanique
| Poids | 32 g |
Description
The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful AIO ready to power the DJI O3 in a simple configuration. It also works great on standard analog systems with the onboard analog OSD chip. The LUX HD AIO G4 builds on all the best features of its predecessors and further improves on hardware components and layout, and is now dedicated to a design for the DJI systems. This AIO uses a G4 processor along with top-of-the-line hardware from the 35A AM32 3-6S ESC powered by four F4 processors! Unleash the capabilities of your FPV Racing Quadcopter with the Lumenier LUX HD AIO G4 Flight Controller! This LUX HD AIO G4 comes in a standard 25x25mm form factor weighing only 10.3g. Note: This AIO works with both the DJI O3 and other Digital FPV Systems. This AIO is also Analog compatible. Check out our other AIO boards as well as our Lumenier product selection! Features Low resistance Mosfet with a Metal case, up to 6s 35A supported Analog current sensor3~6S Lipo (12.6~25.2V) Input 16M Flash Memory Blackbox 25x25mm Mounting Pattern G473 Flight Controller OSD (Analog / Digital) ICM42688 Gyro 35A AM32 ESC DJI Ready Specifications MCU: STM32G473 / 170Mhz / 512KB Flash BEC: 2x BEC, 5V and 10V, 2.5A each VBAT Input: 8-32V, 3-6S Lipo Blackbox: 16MB (128M Bit) MOSFET: Low resistance Amperage: 35A up to 6S Current sensor: Analog Dimensions: 36x36mm ESC MCU: F4 AM32 DJI Digital Port: Yes Gyro: ICM42688 LED: WS2812b FC MCU: G473 PMW Output: 4 Weight: 10.3g Beepers: Yes OSD: Yes 12C: 1 Downloads Lumenier LUX HD AIO - G4 Manual Download the LUX HD AIO-G4 .hex file for Betaflight 4.5.0 (comes pre-installed on the board) Includes 1x Lumenier LUX HD G4 AIO Whoop/Toothpick Flight Controller (w/ 35A AM32 4in1 ESC) 1x 5-Pin Micro JST Cable 1x DJI Plug-N-Play Cable 1x 220uF 25V Capacitor 1x XT30 LiPo Pigtail 1x 4-Pin Micro JST 1x Hardware Set Wiring Diagram
Produits similaires
racedayquadsEn stock
HappyModel Crazybee F4 Lite 1S Whoop Flight Controller for Mobula6 - Choose Your RX
80.43 €92.81 $
Voir chez le vendeur ↗
racedayquadsEn stock
HappyModel 1S F4 AIO Toothpick/Whoop Flight Controller w/ 5A 8bit 4in1 ESC & 200mW VTX - ELRS 2.4GHz SPI
86.62 €99.95 $
Voir chez le vendeur ↗
racedayquadsEn stock
EMAX Tinyhawk 3 1-2S F4 AIO Flight Controller 5A ESC 25/100/200mW VTX
111.37 €128.51 $
Voir chez le vendeur ↗
racedayquadsEn stock
iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX
86.62 €99.95 $
Voir chez le vendeur ↗
