racedayquadsFlywoo· Commande de moteurs
Flywoo GOKU F405 V2 1-2S AIO Whoop/Toothpick Flight Controller (w/ 12A BLHeli_S 4in1 ESC) + ELRS 2.4 GHz
Réf. fabricant
Réf. fabricant
Vendu par racedayquads à 92.81 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 129.37 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 92.81 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 21.56 € |
| Total livré | 129.37 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
3 relevés de prix/stock depuis le 20/08/2026
| Courant | 12 A |
| Poids | 45 g |
With the rise of digital transmission, FLYWOO presents an innovative solution for 1-2S HD Micro Drones. The GOKU F405 HD V2 AIO integrates a Type-C interface, a high-performance F405 BGA MCU, and multiple UARTs. It features a built-in 9V 2A BEC module to prevent power cuts in the O3 Air unit. It also includes a serial ELRS 2.4G receiver, an 8MB black box, a barometer, and a current sensor for HD VTX. The socket-style motor connections and plug-and-play O3 design simplify installation and debugging, ensuring efficiency and convenience. July 2026: Gyro changed to BMI270. Check out all our Whoop/AIO Flight Controllers and our other great products from Flywoo! Features Multifunctional Design Plug-and-Play O3 Port Motor Socket Design New Power Supply Type-C Design SERIAL ELRS 2.4GHz RX 1. Receiver protocol Serial ELRS 2.4G RX uses the Crossfire serial (CRSF) protocol to communicate between the receiver and the flight controller board. So, the Serial ELRS 2.4G RX supports upgrading to ELRS Configurator with no need to flash Betaflight flight controller firmware. 2. Binding steps To enter the binding mode, unplug and plug the power/data cable three times; The RX LED will flash rapidly twice, indicating the receiver is in binding mode; Ensure the TX module or wireless transmitter enters binding mode; If the receiver's light stays on constantly, it's bound. 3. Upgrade steps The Serial ELRS 2.4G RX can be updated via Wi-Fi or Betaflight serial passthrough. Insert the FC into the computer, but do not connect to the Betaflight configurator. Select the target "FLYWOO 2.4Ghz EL24P" Use the BetaflightPassthrough option in the ExpressLRS configurator for the upgrade. 9V ELECTRONIC SWITCH By controlling the switch of USER2, it is possible to control all 9V power supplies to the flight controller, temporarily shutting off the image transmission to avoid damage to the equipment due to prolonged high temperatures. Connect the flight controller to the BF configurator and switch to the M
