
Réf. fabricant HAPP-5A10087
Vendu par racedayquads à 142.31 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 188.77 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 142.31 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 31.46 € |
| Total livré | 188.77 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 73 g |
The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV 1S Whoop comes equipped with a lightweight AIO flight controller and 2.4Ghz ELRS receiver. The drone is Ready to Rip! Check out our other pre-built quads, as well as the rest of our HappyModel selection! Features AIO Flight controller with Serial ELRS Receiver and 5.8G Openvtx Super light 1S 65mm Brushless whoop only 17.7g Equipment with the lightest brushless motors-SE0702 only 1.46gram FX17-B 1/3 CMOS 800TVL Camera awesome footage Smooth and powerful Compatible for 1S Lipo/LIHV Specifications Wheelbase: 65mm Size: 81mm x 81mm x 37mm Weight: 17.7g Option: -V1 version with SuperX ELRS V1.0 AIO -V2 version with SuperX ELRS V2.0 AIO The only difference is v2.0 AIO FC comes with motor plug but V1.0 AIO FC is no motor plug. Motors Mode: SE0702 KV28000 Configu-ration: 9N12P Stator Diamter: 7mm Stator Length: 2mm Shaft Diameter: Φ1mm Motor Dimension(Dia.xLen): Φ9.5mm x 14mm Weight(g): 1.46g No.of Cells(Lipo): 1S only Propellers Materials: PC Inch: 31mm Pitch: 0.8 in Weight: 0.21g Mount hole diameter: 1mm AIO SuperX ELRS AIO 5-IN-1 Flight controller MCU:STM32F411CEU6 (100MHZ, 512K FLASH) ,ESP32-PICO-D4 Sensor:BMI270(SPI connection) Mount hole size: 25.5mm x 25.5mm Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Built-in Betaflight OSD(SPI Control) Built-in 5.8G OpenVTX 0mw~400mw (MSP control) Built-in UART ExpressLRS v3.0.0 Built-in voltage meter sensor , voltage meter scale 110 Built-in current meter sensor , current meter scale 1175 Power supply: 1S LiPo/LiPo HV Current: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: Bluejay v0.19.2 Default protocol: DSHOT300 Recommend ESC Startup power value to min1100/max1200 Onboard Serial ExpressLRS receiver Packet Rate option: 50Hz/150Hz/250Hz/500Hz ExpressLRS Firmware version: V3.0 RF Frequency: 2.4GHz Antenna : Enameled copper wire antenna Telemetry output Power: <12dBm Receiver protocol: Serial_based



