
Réf. fabricant BF15573
Vendu par racedayquads à 57.22 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 86.66 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 57.22 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 14.44 € |
| Total livré | 86.66 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 27 g |
The V1.2 of the iFlight Blitz Mini F7 20x20 has arrived, now in Mini version. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. Check out all our 20x20 FCs as well as our entire iFlight selection! Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Specifications -October 20, 2023: Flight control Blackbox flash capacity changed from 16MB to 8MB -April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456 Flash: 8MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA/SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws Dimensions: 30.5x27 mm Weight: 5g Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemetry Includes 1x iFlight BLITZ Mini V1.2 F7 20x20 Flight Controller 1x FC Connectors 1x Silicon grommets



