
Manufacturer part no. BF15573
Listed by racedayquads at €57.22. Delivered to France, including shipping, VAT and any customs duty, it comes to about €86.66. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €57.22 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €14.44 |
| Total delivered | €86.66 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 27 g |
The V1.2 of the iFlight Blitz Mini F7 20x20 has arrived, now in Mini version. These new flight controllers are equipped with a plug and play connectors making connecting your video transmitter, radio receiver, and other periphery sensors a breeze. Check out all our 20x20 FCs as well as our entire iFlight selection! Features Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Specifications -October 20, 2023: Flight control Blackbox flash capacity changed from 16MB to 8MB -April 6, 2024: The flight control is updated to version V1.2, and the gyroscope is changed from BMI270 to ICM42688. MCU: STM32 F722 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456 Flash: 8MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA/SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFRC-IFLIGHT_BLITZ_F722 Mount pattern: 20x20 mm / 4mm PCB hole diameter, silicon grommets for M3 screws Dimensions: 30.5x27 mm Weight: 5g Wiring Suggestion UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemetry Includes 1x iFlight BLITZ Mini V1.2 F7 20x20 Flight Controller 1x FC Connectors 1x Silicon grommets

