racedayquadsHOBBYPORTER
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
Réf. fabricant 19362
29.74 $≈ 25.90 €
Le prix en résumé
Vendu par racedayquads à 25.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 49.08 €. Prix relevés le 2026-09-18.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
En stock
Coût total livré estimé
| Article | 25.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 8.18 € |
| Total livré | 49.08 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 9 g |
Description
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3. The Nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The EP1 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability. Check out the RP2 if that fits your needs more! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories! Features TCXO oscillator for solid connection & reliability. Improved PCB design is better for heat dissipation. ELRS Firmware V3 (pre-installed) LED on the top side of PCB. Solder pads are improved and easier to solder to. Open-source receiver based on ExpressLRS Upgraded rigid antenna with greater durability and performance Specifications Item: RP1 Nano ExpressLRS 2.4ghz Receiver Type: ISM Antenna: 65mm 2.4ghz T Antenna Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 2.2g (Including antenna) Dimension: 13mmx11mmx3mm Firmware Version: ExpressLRS v3.0 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF User Manual RP1 Receiver User Manual Includes 1x RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver 1x 65mm UFL 2.4Ghz T Antenna 1x User Manual
Produits similaires
racedayquadsEn stock
HappyModel FLI14+ 2.4GHz Mini Receiver - FlySky Compatible
16.58 €19.03 $
Voir chez le vendeur ↗
racedayquadsEn stock
RadioMaster R88 V2 2.4GHz Frsky D8/D16/SFHSS Protocol PWM Receiver
25.90 €29.74 $
Voir chez le vendeur ↗
