racedayquadsHOBBYPORTER
RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver
Manufacturer part no. 19362
$29.74≈ 25.77 €
Price summary
Listed by racedayquads at €25.77. Delivered to France, including shipping, VAT and any customs duty, it comes to about €48.92. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €25.77 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.15 |
| Total delivered | €48.92 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 9 g |
Description
Note: The packaging in this product will mention V2, however the software is confirmed ELRS V3. The Nano receivers, developed by Jye Smith of ExpressLRS, have ESP8285 MCU and SX1280 RF chip. RP1 has a UFL antenna socket while RP2 has a built-in ceramic antenna, making it super light and small. Both have WIFI built in, allowing you to upgrade firmware and configure the Receiver via WebUI. Both RP1 and RP2 have low-latency, high-refresh-rate RF module, making them ideal for FPV and long-range. Furthermore, their ultra-light Nano size allows you to fit them anywhere, from whoops to fixed-wing models. The EP1 comes with ELRS Firmware V3 pre-installed and a TCXO oscillator for solid connection & reliability. Check out the RP2 if that fits your needs more! Check out the rest of our RC receivers and all our RC transmitters, modules, and accessories! Features TCXO oscillator for solid connection & reliability. Improved PCB design is better for heat dissipation. ELRS Firmware V3 (pre-installed) LED on the top side of PCB. Solder pads are improved and easier to solder to. Open-source receiver based on ExpressLRS Upgraded rigid antenna with greater durability and performance Specifications Item: RP1 Nano ExpressLRS 2.4ghz Receiver Type: ISM Antenna: 65mm 2.4ghz T Antenna Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: 5v Weight: 2.2g (Including antenna) Dimension: 13mmx11mmx3mm Firmware Version: ExpressLRS v3.0 pre-installed FW Target: RadioMaster RP1/2 2400 RX Bus interface: CRSF User Manual RP1 Receiver User Manual Includes 1x RadioMaster RP1 V2 2.4GHz ELRS Nano Receiver 1x 65mm UFL 2.4Ghz T Antenna 1x User Manual
Similar products
racedayquadsIn stock
HappyModel FLI14+ 2.4GHz Mini Receiver - FlySky Compatible
€16.49$19.03
View at seller ↗
racedayquadsIn stock
RadioMaster R88 V2 2.4GHz Frsky D8/D16/SFHSS Protocol PWM Receiver
€25.77$29.74
View at seller ↗
