racedayquadsNewBeeDrone· Commande de moteurs
NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC
Réf. fabricant 18958
228.47 $
Réf. fabricant 18958
Vendu par racedayquads à 198.00 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 255.60 €. Prix relevés le 2026-09-16.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 198.00 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 42.60 € |
| Total livré | 255.60 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Courant | 55 A |
| Poids | 54 g |
NewBeeDrone Infinity AIO V2 is the next generation of Infinity AIO Flight Controller. NBD has invested an immense amount of R&D time to optimize the hardware between high current and signal processing layout to make the board extremely compact and with no interference. Additionally, by sealing every component inside the aluminum heatsink which acts like a shield to protect from dust and other conditions, NBD maximizes the physical toughness of the AIO stack. The NewBeeDrone Infinity AIO V2 Pro is upgraded from AIO V2. Now it comes with Dual BMI270 Gyro. Better performance on handling noise and better reliability. Dual-Gyros allows device redundancy and also measurement redundancy. Having two gyros mounted to each other, the flight controller is able to cancel out the effects of a noisy axis on one of the IMUs to better handle strong winds and gusts, allowing smoother flight capabilities for filming aerial views. Check out our AIO flight controllers, as well as the rest of our NewBeeDrone selection! Specifications Voltage Input: 3-6S MCU: STM32F745VEH6 Gyro: 2xBMI270 Blackbox: 16MB UARTs: 5 ESC MCU: SMT32G071 BLHELI32 Max Continuous Current: 55A Max Burst Current: 65A BEC: 10V 3A 30W Design for DJI FPV Air Unit Betaflight OSD support Analog build I2C: SCL & SDA ready Buzzer: Yes LED: Yes 5V 3A Power supply for external LED or GPS module Mounting Pattern: 30.5x30.5 Weight: 22g Includes 1x NewBeeDrone Infinity V2 PRO 3-6S 30x30 AIO Flight Controller w/ 55A 32bit ESC 1x Infinity AIO V2 PRO to DJI Air Module Cable 100mm (Silicon wire) 1x Infinity AIO V2 PRO to DJI Air Module V2 Cable 100mm (Silicon wire) 2x Infinity AIO V2 PRO8 16Pin Cable 150mm (Teflon wire) 13x Nylon Lock Nut 5x Steel Screw M3x14 4x Grommets Short 4x Grommets Long 1x 470uf 35v Electrolytic Capacitor 1x XT60 Cable
