

Réf. fabricant 14041203
Vendu par MÄDLER à 125.46 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 168.55 €. Prix relevés le 2026-10-04.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 125.46 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 28.09 € |
| Total livré | 168.55 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 320 g |
| Recommended belt width max. | 35 mm |
| Tensioning way | 40 mm |
| Width of tensioning roller | 40 mm |
| Material | Plastic |
| Surface | Black |
| Tensioning force | 132 – 60 N |
Material: Housing from thermoplast. Tensioning pulley made of ultra-high-molecular weight polyethylene based on PE-UHMW, electrostatically dissipative. Screws and spring from stainless steel. These small, ready-to install tensioners enable noise reduction and wear reduction at belts. • With spiral, linear spring. On choice two tensioning forces. • With colored wear-off indicator: Green: o.k. Yellow: still o.k. Red: Tensioning force too low (below 32N or 60N). • Usable travel up to the end of the yellow range: About 32mm. Total travel about 40mm. • Max. permissible belt speed 3m/s Temperature range: -20°C bis +60°C. * Tensioning way. ** Max. recommended belt width.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





