MÄDLER
Réf. fabricant 41201405
Vendu par MÄDLER à 2630.09 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 3174.11 €. Prix relevés le 2026-08-08.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 2630.09 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 529.02 € |
| Total livré | 3174.11 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 48 kg |
| Input shaft diameter | 28 mm |
| Max input power at 1 000 min 1 | 9.26 kW |
| Max input power at 1 500 min 1 | 12.57 kW |
| Max input power at 250 min 1 | 2.78 kW |
| Max input power at 3 000 min 1 | 19.84 kW |
| Max input power at 50 min 1 | 0.58 kW |
| Max input power at 500 min 1 | 5.18 kW |
| Max input power at 750 min 1 | 7.27 kW |
| Max torque at 10 min 1 | 525 Nm |
| Max torque at 100 min 1 | 470 Nm |
| Max torque at 150 min 1 | 440 Nm |
| Max torque at 200 min 1 | 420 Nm |
General data: 3 Designs, 6 standard version, and many further variations available as multi-shaft gearboxes, please enquire. Also available in corrosion-proof and NO-TOX version for the food processing and pharmaceutic industry. Housing: Thick-walled grey cast iron, fully sealed against oil leaks and protected against dust. Due to the cube shape, all 6 sides of the gear box can be used as mounting surfaces. The diameters l1 and l2 are provided for use as alignment studs. Gearing: Hardened bevel gears, lapped in pairs Special transmission ratios available on request. Bearing System: Generously dimensioned roller bearings, rein- forced bearings on request. Lubrication: The gearboxes are fully enclosed, lubricated for life and maintenance free. On request, the gearboxes can also be supplied with oil change lubrication or NO-TOX lubrication for the food industry. If the gearbox is used at higher speeds (see table) venting must be provided. For this purpose, please state the mounting position (downward-facing side) and operating time. Model K: Input side A: Ratio for gearing up. Input side C: Transmission ratio for gearing down.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.
| Max torque at 300 min 1 | 380 Nm |
| Max torque at 50 min 1 | 505 Nm |
| Max torque at 600 min 1 | 300 Nm |
| Output shaft diameter | 42 mm |
| Rim length | 200 mm |
| Size | 30 |
| Version | 20 |