

Réf. fabricant 64862100
Vendu par MÄDLER à 36.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 62.28 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
| Article | 36.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 10.38 € |
| Total livré | 62.28 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
| Poids | 43 g |
| Inner diameter | 18 mm |
| Length | 15 mm |
| Outer diameter | 42 mm |
| Version | 1 |
| Material | Aluminum |
| Profile type | KN 18 x 22 mm |
| Screw din 912 | M 6 x 16 |
| Surface | Blank |
Material: Aluminium. Screw stainless steel A2-70. Single-split clamp collars, as end-stops on spline shafts. These rings don´t damage the shaft. The clamping force is much stronger than with set collars. They are easy to readjust. Version 1: The thread of the screw DIN 912 is covered with a layer of nylon. Version 2: with additional nut, for adjusting the inner diameter and as lock nut. Tolerance b: +0.08mm / -0.25mm . Temperature range: -40°C to +175°C.
Produits sémantiquement proches et moins chers — vérifiez que les caractéristiques correspondent à votre besoin.





