MÄDLERMÄDLER
Index plunger 817 version G bolt diameter 4mm
Réf. fabricant 66673400
10.27 $≈ 8.90 €
Le prix en résumé
Vendu par MÄDLER à 8.90 €. Livré en France, port, TVA et droits de douane éventuels compris, il revient à environ 28.68 €. Prix relevés le 2026-08-05.
Le coût livré est une estimation pour un article seul expédié en France métropolitaine ; seul le panier du vendeur fait foi.
Sur commandedélai 14 j
Coût total livré estimé
| Article | 8.90 € |
|---|---|
| Frais de port | 15.00 € |
| TVA (20 %) | 4.78 € |
| Total livré | 28.68 € |
Estimation pour un article seul livré en France métropolitaine, expédié hors UE : des droits de douane et frais de dédouanement peuvent s'ajouter, facturés par le transporteur.
Documentation technique
Caractéristiques (extraites automatiquement)
Mécanique
| Poids | 88 g |
Autres caractéristiques
| Bolt diameter d1 0 02 0 04 | 4 mm |
| Bolt overhang | 4 mm |
| Screw in length | 16 mm |
| Spring load end | 12 N |
| Spring load inital | 4 N |
| Thread length at d4 | 4.5 mm |
| Wrench size | 10 mm |
| Material | Steel |
| Shape | G |
| Surface | Black oxide finish |
| Thread size | M 8×1 mm |
| Thread size on top shape g gk | M 3 mm |
Description
Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: – small outer dimensions – most of the release mechanism (version C/CK) is covered – defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer’s request is required or where the plunger pin is not shifted manually.