MÄDLERMÄDLER
Index plunger 817 version G bolt diameter 4mm
Manufacturer part no. 66673400
$10.27≈ 8.90 €
Price summary
Listed by MÄDLER at €8.90. Delivered to France, including shipping, VAT and any customs duty, it comes to about €28.68. Prices last checked on 2026-08-05.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
On backorderlead time 14 d
Estimated landed cost
| Item | €8.90 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.78 |
| Total delivered | €28.68 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Datasheets & documents
Specifications (automatically extracted)
Mechanical
| Weight | 88 g |
Other characteristics
| Bolt diameter d1 0 02 0 04 | 4 mm |
| Bolt overhang | 4 mm |
| Screw in length | 16 mm |
| Spring load end | 12 N |
| Spring load inital | 4 N |
| Thread length at d4 | 4.5 mm |
| Wrench size | 10 mm |
| Material | Steel |
| Shape | G |
| Surface | Black oxide finish |
| Thread size | M 8×1 mm |
| Thread size on top shape g gk | M 3 mm |
Description
Material: Steel, black oxide finish, plunger pin hardened. Knob: Plastic Thermoplast (polyamide) black, matt finish, cannot be disassembled. Indexing plungers 817 offer the following advantages: – small outer dimensions – most of the release mechanism (version C/CK) is covered – defined thread length by an undercut at the end of the thread (version G/GK). Version B/BK: With knob, without notched catch, this version is used where, on releasing the knob, the plunger pin should be returned to its initial position by the spring force. Version C/CK: With knob, is used if the plunger pin has to remain in retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notched catch stops the locked-in knob from returning to its initial position accidentally or due to vibration. Version G/GK: With threaded plunger end, for applications where a special knob to customer’s request is required or where the plunger pin is not shifted manually.