HiwonderHiwonder· Motor control
Hiwonder 6 Channel Digital Servo Tester with Over-Current Protection
Manufacturer part no. 21090211
$18.99
Manufacturer part no. 21090211
Listed by Hiwonder at €16.46. Delivered to France, including shipping, VAT and any customs duty, it comes to about €49.75. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €16.46 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €8.29 |
| Total delivered | €49.75 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 50 g |
Two Power Supply Methods Two Power Supply Methods Product Parameters 1. High-precision potentiometer can control the steering gear in real time. 2. Onboard 3-way overcurrent protection interface (0.1.2 interface), which can prevent the steering gear from being burned out by excessive current. 3. High-resolution PWM signal, onboard 8-bit MCU, can make the control accuracy higher. 4. Support manual steering gear controller / steering gear reset to center, switch by function button 5. Accuracy of steering gear controller: 0.09° (refers to the minimum change value of PWM 1us) 6. Compatible with two power supply link methods of lithium battery/power adapter. (5-8.4V) 7. Onboard 6-way PWM digital servo interface, which can be controlled by high-precision potentiometer. 8. The size of the 6-way knob is 76mm*53mm, and the weight is 37g. How to use: Supply power to the controller, the voltage can be 5~8.4V, the specific voltage is subject to the actual use of the servo’s rated voltage; The servo is plugged into the 3Pin servo port, + is the positive pole, -is the negative pole, and S is the signal terminal; The power-on default potentiometer control mode, the servo rotates synchronously when the knob is turned; The button below the knob can switch the mode, press respectively to "Manual Mode": Knob control. "Neutral Mode": Return to the center position. Information of Controller "+" Positive Pole "-" Negative Pole "S" Signal Terminal Manual Mode: Knob Control. Neutral Mode: Return to Center Position. Manually Control The Servo The angle rotation of the 6-way servo can be controlled in real time through the high-precision potentiometer. Servo Quickly Return To Center Through the reset button, the angle of the 6-way servo can be returned to the center and reset to 90°. Overcurrent Protection 0, 1, 2 servo interfaces have over-current protection function. Robotic Arm Debugging Claw Debugging Servo Gimbal Debugging Servo Tester 1 Channels Servo Tester 6 Channels 20-60KG/180°-270
