HiwonderHiwonder· Motors & actuators
Hiwonder LD-3015MG Full Metal Gear Digital Servo with 17kg High Torque for RC Robot Car
Manufacturer part no. 21100002
Manufacturer part no. 21100002
Listed by Hiwonder at €12.12. Delivered to France, including shipping, VAT and any customs duty, it comes to about €44.54. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €12.12 |
|---|---|
| Shipping | €25.00 |
| VAT (20%) | €7.42 |
| Total delivered | €44.54 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 80 g |
Product Description Hiwonder LD-3015MG is a full metal gear standard digital servo with 17 kg high torque, using aluminum case for Robotic RC Car with control angle 270 degrees. Feature 17KG large torque. 15 kg·cm (208 oz·in) 6V; 17 kg·cm (236 oz·in) 7.4V Full metal gear. Improve servo’s accuracy and extend its service time 270 degrees rotation. Controllable angle range from 0 to 270 degrees, excellent linearity, precision control It can rotate within 360 degrees when power off Use high-precision potentiometer with a new design. Accuracy and linearity have been greatly improved Dimension: 40mm*20mm*40.5 mm（1.575 inch*0.787 inch* 1.594 inch） Metal Gear 15kg Large Torque 270° Rotation Degree Packing List 1* LD-3015MG digital servo 1* 30cm servo wire 1* servo horn kit Specifications Item Specification Weight 62g(2.18OZ) Dimension 40mm*20mm*40.5 mm(1.575 inch*0.787 inch* 1.594 inch) Speed 0.16sec/60°(7.4V) Accuracy 0.4° Torque 15 kg·cm (208 oz·in) 6V;17 kg·cm (236 oz·in) 7.4V Working Voltage 6-7.4V Min Working Current 1A No-load Current 100mA Spline 25T (6mm diameter) Servo Wire 30cm (11.8inch) in length Control Method PWM Pulse Width 500~2500us, to (0~270deg) Duty Ratio 0.5ms~2.5ms Pulse Period 20ms Wire Layout red wire: + black wire: GND white wire: PWM/signal Package List 1* digital servo 1* 30cm servo wire 1* servo horn kit Please make sure that the duty cycle of the controller you used is confirmed to our specifications, otherwise, the servo can't turn up to a claimed degree. Important Tips Recommend to use lithium polymer battery with high rate discharge(min 5C), please don't use the dry battery. Please use a short and thick power cord, don't use Dupont cord.
