Amazon· Tools & workshop
FYSETC 3D Printer Parts UCAN Board V1.0 Based on STM32F072 USB to CAN Adapter Type C Interface Support CANable/Candlelight/Klipperr Firmware-Pack of 1
$13.13≈ 11.40 €
Price summary
Listed by Amazon at €11.40. Delivered to France, including shipping, VAT and any customs duty, it comes to about €31.68. Prices last checked on 2026-08-18.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
Marketplace listing: this item is sold by an individual or a third-party shop, not by the platform. Condition, stock and lead times are the seller's, and the listing disappears once the item is sold.
In stock★ 4.8 (0 reviews)
Estimated landed cost
| Item | €11.40 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.28 |
| Total delivered | €31.68 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Description
1. What's UCAN? It is an open source USB-to-CAN interface board, based on STM32F072 and candleLight open source firmware, and supports linu/win/mac multi-platform. Of course, you can also develop your own firmware to use, it is completely open source. 2. Firmware preloaded: UCAN has already burned the firmware when it leaves the factory. Generally, there is no need to burn it again. If the CAN device appears on the computer plugged into windows PC , it means that it is working normally. If need to reflash the firmware, please refer to the steps on WIKI.FYSETC Module-Can. 3. Hardware: UCAN is designed based on STM32F072CBT6, PA11/PA12 is connected to USB-C, and PA8/PA9 is connected to CAN interface. 3-pin screw plug terminal: CANH, CANL, GND. 4. About Terminating Resistors: We provide two ways to terminate the resistor, the default is composed of two 59R resistors (R1/R2). The alternate location consists of a 120R resistor and a two-pin jumper.There is no difference in general use, the default is onboard. More info please check the Schematic Diagram on FYSETC Wiki. 5. Features: Supports CAN2.0A and B, baud rates up to 1M. Headers to enable/disable termination, On-board termination resistors (2 x 59R) are used by default.
Similar products
AmazonIn stock
1260PCS M2 Hex Socket Head Screws Kit,M2-0.4x4/6/8/10/12/16/20 mm
€8.56Rated 4.6 out of 5, 0 reviews
View at seller ↗
AmazonIn stock
【WT901C-TTL 9-Axis Vibration Inclinometer】High-Performance Acceleration+Gyro+Angle (XY 0.05° Accuracy)+Digital Compass, Triaxial MPU9250 Tilt Sensor【Kalman Filtering】 for Arduino, Raspberry Pi
€33.31Rated 3.9 out of 5, 0 reviews
View at seller ↗
AmazonIn stock
ElectroCookie PCB Prototype Board Solderable Breadboard for DIY Electronics, Compatible for Mini Arduino Soldering Projects, Gold-Plated (30 Pack, Black)
€34.25Rated 4.6 out of 5, 0 reviews
View at seller ↗
AmazonIn stock
25Pcs Double Sided Protoboard Prototyping Pcb Board 4cm x 6cm
€9.41Rated 4.4 out of 5, 0 reviews
View at seller ↗
