m5stackM5Stack· Displays & interfaces
M5Stack Dial v1.1 - ESP32-S3 Smart Rotary Knob with 1.28" Round Touch Screen
Manufacturer part no. K130-V11
$34.90≈ 30.25 €
Manufacturer part no. K130-V11
Listed by m5stack at €30.25. Delivered to France, including shipping, VAT and any customs duty, it comes to about €54.30. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €30.25 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €9.05 |
| Total delivered | €54.30 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 81 g |
Description Dial v1.1 is a high-performance, multifunctional embedded development board that has been fully upgraded from the original Dial product. The new version features the Stamp-S3A as the main controller, further enhancing system processing power and stability. Additionally, the core module antenna and buttons have been optimized to effectively improve wireless communication performance and user interaction experience. The product is equipped with a 1.28-inch round TFT touch screen and a high-precision rotary encoder, and includes an RFID detection module, RTC circuit, onboard buzzer, and under-screen buttons to enable device interaction and wake-up alerts. The power supply solution supports DC 6～36V wide voltage input and includes a lithium battery interface and charging circuit to meet diverse application needs. Furthermore, the reserved PORT.A and PORT.B interfaces facilitate the expansion of I2C and GPIO devices. This product is applicable in smart home control, IoT applications, smart wearables, access control systems, industrial control, and educational maker projects. Features Round TFT touch screen Stamp-S3A as the main controller Rotary encoder RFID detection module Wide voltage input Interface expansion: Reserved PORT.A and PORT.B interfaces Development Platform UiFlow2 Arduino IDE ESP-IDF PlatformIO Includes 1 x Dial V1.1 1 x L-shaped 1.5mm hex wrench (compatible with M2 screws) 1 x 2.54-2P terminal Applications Specifications Specification Parameter SoC ESP32-S3FN8@Dual-core Xtensa LX7, 240MHz USB USB OTG, USB Serial/JTAG Flash 8MB Wi-Fi 2.4 GHz Wi-Fi Wide Voltage Input Range DC 6 ~ 36V Screen Driver GC9A01 1.28 Inch 240 x 240px Touch Driver FT3267 RFID WS1850S @ Tag operating frequency: 13.56 MHz, ISO/IEC 14443 Type A/Type B protocol Encoder Resolution: 16 positions, 64 pulses/rev Buzzer 80dB Battery Socket Specification 1.25mm-2P Sleep Current USB supply: DC [email protected] (LDO idle power consumption) Battery only: DC 4V@6uA Operating Current USB sup
