
Manufacturer part no. EF04065
Listed by elecfreaks at €1.72. Delivered to France, including shipping, VAT and any customs duty, it comes to about €20.06. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €1.72 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €3.34 |
| Total delivered | €20.06 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 10 g |
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino/Freaduino compatible boards easily with various digital, analog, and I2C/Uart interfaces. These breadboard-less firm connections are prepared to extensive modules like potentiometers, sensors, relays, servos even buttons, just plug and play. Octopus 5mmLED light Brick, and special sensors Arduino board and ambient light sensor extension combination, can be used in the interaction with the light works. When the LED light module is connected to Arduino, the digital pin (LOW on, HIGH off) is used to control it. The brightness of LED can be controlled via PWM output. The Freaduino Sensor Shield is the perfect shield to connect this sensor to Arduino. Or Freaduino UNO which we had a pre-stray Octopus Brick interface. There are five colors for you to choose from. White(default), Red, Blue, Green, and Yellow. SPECIFICATION Voltage: +3.3-5V Pin Definition :1 Signal(Yellow) 2 Vcc(Red) 3 GND(black) Weight: 5g PACKAGE LIST Module Quantity 5mm LED Brick 1 Analog Sensor Cable 1 HARDWARE CONNECTION Connect LED brick to P0 port on OCTOPUS:BIT. CODE You can see the whole program from the link Or you can download it from the page below. RESULTS LED brick flashes at a 1-second interval.