52pi52Pi· Displays & interfaces
52Pi IIC I2C LCD 2004 Serial 20x4 Display Module with I2C Interface Adapter for Raspberry Pi Arduino STM32 DIY Maker Project BPI Tinker Board Electrical IoT Internet of Things
Manufacturer part no.
Manufacturer part no.
Listed by 52pi at €6.54. Delivered to France, including shipping, VAT and any customs duty, it comes to about €25.85. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €6.54 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €4.31 |
| Total delivered | €25.85 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 110 g |
[Description] - The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures. - The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus. - It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL). - Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more. [Features] - 20 Characters * 4 Lines, Character LCD module - Two backlight options. - 5V for Logic Circuit - Low power consumption - Support I2C protocol - Default Register Address: New version: 0x3F, old version: 0x27 - Easy to use - Compatible with Raspberry Pi, Banana Pi, Tinker Board, STM32, ESP32 etc. - Type: Chip On Board - Number of Data line: 8-bit parallel [Compatibility] Used for connecting Ar-duino and Raspberry pi and it can be used to display real time clock, temperature, humidity etc. (A potentiometer is also necessary to adjust the contrast. Working Voltage: Only 5V ) [Package Includes] 1 set： 1 x LCD 2004 Module 4 x Jumper Wires 2 sets： 2 x LCD 2004 Module 8 x Jumper Wires 4 sets： 4 x LCD 2004 Module 16 x Jumper Wires [52Pi WiKi] Z-0235 - 52Pi Wiki
