Manufacturer part no. Q177
Listed by lilygo at €40.38. Delivered to France, including shipping, VAT and any customs duty, it comes to about €66.46. Prices last checked on 2026-09-18.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €40.38 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €11.08 |
| Total delivered | €66.46 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 250 g |
LoRa V1.0 Introduce This product is an LoRa [SX1276 chip] Module based on ESP32 with 0.96 Inch OLED . As a LoRa remote modem, 868-915MHz frequency, high sensitivity and reliability, and long transmission distance. Supports for Arduino development environment perfectly can be used for program checking and the development is easy and fast. Support for Sniffer software protocol analysis, Station, SoftAP, and Wi-Fi Direct modes If you don't want the Kit, check the LoRa32 V1.0 The 868/915MHz antenna needs to be in connection with the IPEX interface (if the antenna is not connected, the signal will be weakened) When using, pay attention to "+" and "-" of the battery, including built-in battery. With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin!) Please use our matching USB cable [micro interface is a little longer than the ordinary version] It is recommended to purchase two-piece for testing in order to transmit and receive data facilitatly. Technology Support [Github] If you need technical support please check the link to find more details. LoRa32 V1.0 Specification MCU ESP32 LoRa Chip SX1276 Flash 4M USB to TTL chip CH910X Antenna Onboard WiFi 3D antenna LoRa antenna OLED 0.96 Inch SSD1306 OLED 128*64 Operating voltage 3.3V to 7V Operating temperature range -40 ° C to + 90 ° C Data rates 150 Mbps @ 11n HT40, 72 Mbps @ 11n HT20, 54 Mbps @ 11g, 11 Mbps @ 11b Transmit power 19.5 dBm @ 11b, 16.5 dBm @ 11g, 15.5 dBm @ 11n Receiver sensitivity up to -98 dBm Red light Power indicator Blue light IO25 programmable control 1. Pin Diagram
