allnetQuinLED· Electronic components
QuinLED Dig-Octa Brainboard 32-8L
Manufacturer part no. QLD-DOBB
$32.50≈ 28.17 €
Price summary
Listed by allnet at €28.17. Delivered to France, including shipping, VAT and any customs duty, it comes to about €51.80. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €28.17 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €8.63 |
| Total delivered | €51.80 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 280 g |
Description
The QuinLED-Dig-Octa Brainboard-32-8L is controlled by the Espressif ESP32 WROOM module and is the core of the Dig-Octa controller system. This module provides a good amount of power to drive LEDs while as well allowing a variety of options to generate the LED data either locally or remote. Product Specifications: Based around Espressif ESP32-WROOM-32UE (ext. antenna only) Built-in WiFi + Ethernet SDcard reader I2C connector (with optional I2C temp and humidity sensor) 3x simultaneous power-in connections Dedicated relay output terminals 2x input button/switch terminals Boot/Reset buttons available 5x M2.5 board mounting holes uFL pigtail and antenna stick included LED Features: 8x level-shifted LED data output channels Level-shifted using 2x 4 port level-shifters to 5.12v all terminals are pluggable to simplify management when stacked Per channel resistor DIP switches Defaults to 249Ω but can be switches per port to 33Ω for better compatibility with 3-wire cable setups “Hardware driven” using ESP32 RMT device channels Special features: Compatible with QPowerPost (power distribution without wires) Custom DC-DC circuit allowing 5v-24v in while always providing 5.12v out 3x 800mA 3.3v LDO onboard for extra stability LAN enable jumper MOSFET based relay circuit -->> Known issue: IC failures at 24V (current revision) On the current board revision, a specific IC can fail when powered at 24V. Not all boards are affected and the failure rate is low. For this specific failure only, warranty coverage is extended to 1.5 years — standard warranty terms still apply to everything else. If your board has died from this issue: fill in this form and we'll ship a replacement once available. Not sure? Join the Discord and we'll help diagnose it. Board working fine? No action needed — the replacement form is for failed boards only. If you'd like to be proactive, this mitigations & fixes guide covers mitigations you can apply to a running board to reduce the chance of failure. Planning
