Manufacturer part no. RA006
Listed by allnet at €42.46. Delivered to France, including shipping, VAT and any customs duty, it comes to about €68.95. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
| Item | €42.46 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €11.49 |
| Total delivered | €68.95 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
| Weight | 300 g |
Build your NAS based on Radxa´s Rock Boards or Raspberry Pi 5 with up to 5 HDD/SSD and up to 100TB capacity The Penta SATA HAT utilizes the M.2/PCIe interface on RADXA´s ROCK Boards* and Raspberry Pi 5 to provide up to 5 SATA ports. The concept of 4 internal SATA and one eSATAp design was chosen because it makes the setup more flexible for the use of external disks. Features Up to 5x HDD/SSD, 2.5inch and 3.5inch storage is supported, max storage 100TB 4x SATA 1x eSATA with power utilizes two lanes of the PCIe 2.1 bus on Rock Pi 4 DC power input with support for both 2.5inch drives and ROCK Pi 4 External standard ATX power supply support for 3.5inch HDD HDD suspend mode support Software RAID 0/1/5 support Optional PWM control fan for HDD heat management Optional OLED display for IP / Store information PLEASE NOTE: You need to order the heat-sink with Rock 4, otherwise the Penta HAT can not be mounted on top. For use with Rock 3A please purchase the base plate for proper installation. eSATAp To fully take advantage of the 5th SATA port, an eSATA connector was implemented which can be exported e.g. out of the case. The eSATA connector provides both data and power. It can directly drive a 3.5inch HDD via a single cable. Performance The Penta SATA HAT is powered by the JMB585 with 2 lanes 5Gbs PCIe buses with up to 10Gbps bandwidth. With 5 SSD's configured in Raid0 mode, speed of up to 803MB/s can be achieved. Product Content Penta SATA HAT board M.2 interface board with high speed Ribbon connector cable Penta SATA HAT works with the following boards: Rock 4 Model A/A+, B/B+ Raspberry Pi 5 - please choose the corresponding kit optional: SATA HAT Top Board
