radiomasterRadioMaster
AG01 MINI CNC Hall Gimbals for TX12 & Zorro
Manufacturer part no. HP0157.AG01MINI-SET-BLK
$99.99≈ 86.65 €
Price summary
Listed by radiomaster at €86.65. Delivered to France, including shipping, VAT and any customs duty, it comes to about €121.98. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €86.65 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €20.33 |
| Total delivered | €121.98 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 500 g |
Description
For the long-awaited AG01 Mini is finally here! Custom designed for the RadioMaster Zorro and TX12, these gimbals allow for unparalleled precision and stick feel. From the aviation-grade aluminum construction, non-contact hall sensors, and pre-installed Sticky360 Mini Gimbal Sticks, be prepared to revolutionize your compact radio experience! Key Features Made with CNC processed aviation grade aluminum. Sticky360 Mini Gimbal Sticks as standard. Non contact hall sensors for accurate control inputs and precise centering. Quad precision bearings for unparalleled stick feel. Adjustable vertical travel angle (Min. 38°, Max. 54°). Custom designed for RadioMaster Zorro & TX12. Specifications Name: AG01 Mini CNC Hall Gimbal Sensor type: Hall Sensor Working voltage: DC 3.3V Linearity: Real-time (No delay) Adjustable vertical travel range: 38°—54° Self-centering adjustment : Yes Easy mode adjustment Adjustable tension : Yes Quad bearing: Yes Temperature range: -20°C-85°C Size: 49*42*48mm Weight: 42g(±0.3g) Review by Nick Burns AG01 MINI Key Features Installation for Zorro & TX12 The AG01 Mini gimbals are shipped as self-centering by default and are compatible with both the Zorro and TX12 Radios. For Zorro The Zorro radio is configured as Mode 1 or Mode 2 by the screws mounted in the rear case of the radio. Both gimbals should be installed in self-centering configuration (as default out of the box) in the Zorro radio. Once the radio is re-assembled the screws in the rear case of the Zorro will set the throttle gimbal. For TX12 One gimbal must be set as throttle and one as self-centering before installation in the radio. 1. Use the included screw (see parts bag) to hold down the centering lever and set the gimbal as a throttle gimbal. 2. Adjust the throttle tension bar until the desired tension is achieved. How to install AG01 MINI on Zorro It’s not the easiest job to install these gimbals in the Zorro, but it’s doable with a little patience and planning. Thanks to Oscar Liang f
