radiomasterRadioMaster
RP3-H ExpressLRS 2.4GHz Nano Receiver
Manufacturer part no. HP0157.0088
$19.99≈ 17.32 €
Price summary
Listed by radiomaster at €17.32. Delivered to France, including shipping, VAT and any customs duty, it comes to about €38.78. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €17.32 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €6.46 |
| Total delivered | €38.78 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 100 g |
Description
Designed specifically for use with our Nexus Control System and compatible with all CRSF/S.BUS enabled flight controllers the RP3-H ExpressLRS receiver comes with a built-in TCXO and an integrated housing design that makes the receiver tougher and ready to mount in modern helicopter frames. With the RP3-H receiver, you can get reliable, stable, and accurate signal reception, which enhances your flight experience and allows for superior performance even in demanding environments. The RP3-H also features an Ext-V telemetry input for compatibility with older ESCs that do not provide battery voltage telemetry via the control unit. The RP3-H receiver uses the Skyworks SKY66112 power amplifier to increase telemetry performance, the PA provides up to 100mw of telemetry power, and antenna switching for antenna diversity. It is developed around the ESP8285 MCU and SX1281IMLTRT RF Chip, offering Lora and FLRC 2.4GHz RF links that provide incredible range and low latency. With Wifi built-in, firmware updates can be done on your craft without the need to remove the receiver. Features Perfect for helicopters and any application that needs a rugged cased serial receiver Plug'n'play solder free RP3-H ExpressLRS receivers compatible with NEXUS Heli flight controller Optimized PCB design for better heat dissipation LNA for better receiver range PA for better telemetry range Antenna Diversity for improved signal stability and range Built-in a TCXO (temperature compensated crystal oscillator) Automatically detects voltage telemetry of external battery voltage or receiver battery/ESC BEC voltage Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS Specifications Item: RP3-H ExpressLRS 2.4GHz Nano Receiver Type: ISM MCU: ESP8285 RF Chip: SX1281 Telemetry RF power: Max 100mW Antenna: 150mm 2.4GHz Antenna x2 Frequency Range: 2.404 - 2.479 GHz Maximum receive refresh rate: 500Hz / F1000Hz Minimum receiver refresh rate: 25Hz Working voltage: DC 4.5
Similar products
radiomasterIn stock
[Pre-order] ER12 PWM - Dual-Band GEMINI and GEMINI-X Receiver
€51.99$59.99
View at seller ↗
radiomasterIn stock
[Pre-order] ER16 PWM - Dual-Band GEMINI and GEMINI-X Receiver
€69.32$79.99
View at seller ↗
