betafpvBetaFPV
Air VTX
Manufacturer part no. 01060025_1
$11.99≈ 10.39 €
Price summary
Listed by betafpv at €10.39. Delivered to France, including shipping, VAT and any customs duty, it comes to about €30.47. Prices last checked on 2026-09-16.
Delivered cost is an estimate for a single item shipped to mainland France; the seller's checkout is authoritative.
In stock
Estimated landed cost
| Item | €10.39 |
|---|---|
| Shipping | €15.00 |
| VAT (20%) | €5.08 |
| Total delivered | €30.47 |
Estimate for a single item delivered to mainland France, shipped from outside the EU: customs duty and clearance fees may apply and are charged by the carrier.
Specifications (automatically extracted)
Mechanical
| Weight | 20 g |
Description
The Air VTX is an analog video transmitter built for pilots who demand simplicity, weight savings, and race-ready performance. Weighing just 0.6g and measuring only 14×10.5mm, it delivers clean 25mW output with PIT mode support—everything you need for competitive flying. Pair it with the Matrix 1S 4IN1 FC for greater flexibility and a cleaner custom build. Bullet Points Ultra‑Lightweight & Compact: At just 0.6g and a compact 14×10.5mm, ideal for weight‑conscious racing builds. Race‑Ready 25mW Output: Provides clean, reliable video transmission for short‑range racing. PIT Mode Support: Low‑power mode, allowing you to power up without interfering with other pilots. FC Pairing: Use with the Matrix 1S 4IN1 FC, offering greater flexibility and clean integration for custom builds. Specifications Operating voltage: 5V Operating current: 150 mA (25mW) VTX internal size: 14*10.5mm Antenna connector: IPEX Output power: 25/PIT Frequency: 5.8GHz 48 channels, with Raceband: 5658-5917MHz Channel SEL: SmartAudio 2.0 Video format: PAL/NTSC Modulation type: FM Frequency control: PLL All harmonic: Max -50dBm Frequency stability: ±100KHz (Typ.) Frequency precision: ±200KHz (Typ.) Channel carrier error: ±1.5dB Antenna port: 50 Ω Operating temperature: -10℃~+80℃ Weight: 0.6g (antenna excluded) Diagram How to Connect with Matrix 1S 4IN1 FC Change Band & Power Air VTX could only use the SmartAudio port for band and power adjustment. Access the OSD menu by moving the Pitch stick up and Yaw stick left. Then navigate to FEATURES > VTX SA to change the settings. Frequency Table: LED Indicators: Boot Functions: Action Function LED Behavior Short press Change band / channel Flash count increases Press and hold (1 sec) Enter band / channel settings Blue LED flashes: band selection mode Green LED flashes: channel selection mode No operation for 15 sec after power‑on Boot locked (settings protected) Green and blue LEDs flash simultaneously; the flash pattern corresponds to the current band and cha
